INVT Inverter GD100-2R2G-2-PV Manual

The INVT GD100-2R2G-2-PV is a high-performance inverter designed for solar energy systems. It features advanced MPPT technology, high efficiency, and a compact design, making it suitable for various applications. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: High-efficiency inverter, LCD display, multiple communication interfaces, and robust protection features.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below.

1. Choose a suitable location: Ensure adequate ventilation and avoid direct sunlight.
2. Mount the inverter securely: Use appropriate mounting hardware.
3. Connect solar panels: Follow the polarity and connection guidelines.
4. Connect to the grid: Ensure compliance with local regulations.
5. Power on the inverter: Check for proper operation.

WARNING! Ensure all electrical connections are secure to prevent hazards.

First-Time Setup

Power on the inverter and follow the on-screen prompts for initial configuration.

1. Select language: Choose your preferred language from the menu.
2. Set grid parameters: Input local grid specifications.
3. Configure solar panel settings: Enter specifications for optimal performance.
4. Save settings: Ensure all configurations are saved before exiting.

CAUTION! Double-check all settings to avoid operational issues.

Specifications

• Input Voltage Range: 100V - 600V DC.
• Output Power: 100 kW.
• Efficiency: Up to 98%.
• Operating Temperature: -25°C to 60°C.
• Dimensions: 600mm x 400mm x 200mm.
• Weight: 25 kg.
• Communication: RS485, Ethernet.

Controls and Settings

Access settings via the LCD display. Use the buttons to navigate through the menu.

Key Controls: Power button, Menu button, Up/Down navigation buttons.

Settings include: Grid configuration, solar panel settings, and operational modes.

Connecting Devices

Ensure all connections are made according to specifications.

1. Turn off the inverter before connecting any devices.
2. Connect solar panels to the designated input terminals.
3. Connect to the grid using the appropriate output terminals.
4. Verify all connections before powering on the inverter.

Tip: Use proper gauge wiring to ensure safety and efficiency.

Operating the Inverter

Follow these steps to operate the inverter effectively.

1. Power on the inverter: Press the power button.
2. Monitor performance: Use the LCD display to check operational status.
3. Adjust settings as needed: Access the menu for configuration changes.
4. Shut down safely: Follow the shutdown procedure to avoid damage.

WARNING! Do not attempt to service the inverter while it is powered on.

Safety Features

The inverter is equipped with multiple safety features to protect both the device and the user.

• Overvoltage protection: Prevents damage from voltage spikes.
• Overcurrent protection: Safeguards against excessive current flow.
• Thermal protection: Shuts down the inverter if overheating occurs.
• Ground fault protection: Detects and mitigates ground faults.

Care & Maintenance

Regular maintenance is essential for optimal performance.

CAUTION! Always disconnect power before performing maintenance.

• Keep the inverter clean: Wipe with a dry cloth.
• Check connections regularly: Ensure all terminals are secure.
• Inspect for damage: Look for signs of wear or corrosion.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed information, refer to the product documentation.

Troubleshooting

Reset: Menu > System > Reset if available.

Service: Contact customer support for assistance.