INVT Inverter GD200-045G/055P-4 Manual

The INVT Inverter GD200-045G/055P-4 is a high-performance inverter designed for various applications, including solar energy systems, industrial automation, and more. It features advanced control algorithms, high efficiency, and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-efficiency inverter, user-friendly interface, multiple protection features, and communication capabilities.

FeatureDescription
High EfficiencyMaximizes energy conversion with minimal losses.
Multiple ProtectionOver-voltage, under-voltage, and over-temperature protections.
Communication PortsSupports RS485 and CAN communication protocols.
User InterfaceLCD display for real-time monitoring and settings adjustment.
Compact DesignSpace-saving design for easy installation.

Installation

Ensure proper installation to maximize performance and safety.

  1. Choose a suitable location: Ensure adequate ventilation and avoid direct sunlight.
  2. Mount the inverter securely: Use appropriate mounting hardware.
  3. Connect input and output terminals: Follow wiring diagrams provided in the manual.
  4. Power on the inverter: Ensure all connections are secure before powering on.

WARNING! Ensure all electrical connections comply with local regulations.

First-Time Setup

Power on the inverter and follow the on-screen prompts for initial configuration.

  1. Select operating mode: Choose between grid-tied or off-grid mode.
  2. Set output voltage and frequency: Adjust settings according to your requirements.
  3. Configure communication settings: Set up RS485 or CAN communication if needed.
  4. Save settings: Ensure all configurations are saved before exiting.

CAUTION! Double-check all settings to avoid operational issues.

Specifications

Controls and Settings

Access settings via the LCD display. Key controls include power on/off, mode selection, and settings adjustment.

Remote Monitoring: Use communication ports for remote access and monitoring.

Connecting Devices

Follow these steps to connect devices to the inverter.

  1. Turn off the inverter before making connections.
  2. Connect solar panels to the input terminals.
  3. Connect the load to the output terminals.
  4. Ensure all connections are tight and secure.

Tip: Use appropriate gauge wiring for connections to prevent overheating.

Operating the Inverter

Monitor the inverter's performance through the LCD display.

  1. Check input and output voltage levels regularly.
  2. Monitor for any error codes displayed on the screen.
  3. Adjust settings as necessary based on performance.
  4. Perform regular maintenance checks to ensure optimal operation.

WARNING! Do not operate the inverter outside of specified limits.

Maintenance

Regular maintenance is essential for the longevity of the inverter.

Regulatory Information

This inverter complies with international safety and performance standards. For support, visit the manufacturer's website or contact customer service.

Troubleshooting

SymptomPossible CauseCorrective Action
Inverter not powering onPower supply issueCheck input voltage and connections.
Error code displayedFault conditionRefer to the error code guide in the manual.
Low output powerOverload or configuration issueCheck load and settings.
OverheatingPoor ventilationEnsure adequate airflow around the inverter.

Reset: Use the reset button if available to restore factory settings.

Service: Contact customer support for further assistance.

INVT Inverter GD200-045G/055P-4 Manual © - All Rights Reserved 2026