INVT Inverter GD200-280G/315P-4 Manual

The INVT Inverter GD200-280G/315P-4 is a high-performance inverter designed for various applications, including solar energy systems and industrial automation. It features advanced control algorithms, high efficiency, and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-efficiency inverter, user-friendly display, multiple communication interfaces, and robust protection features.

Feature	Description
High Efficiency	Up to 98% efficiency for optimal energy conversion
User-Friendly Display	Intuitive interface for easy monitoring and control
Multiple Communication Interfaces	Supports RS485, CAN, and Ethernet for versatile connectivity
Robust Protection Features	Over-voltage, under-voltage, and over-temperature protection
Compact Design	Space-saving design for easy installation

Installation

Carefully unpack the inverter and inspect for any damage. Install the inverter in a well-ventilated area.

Mount the inverter on a stable surface using appropriate hardware.
Connect the DC input from the solar panels or battery.
Connect the AC output to the electrical system.
Ensure all connections are secure and insulated.

WARNING! Ensure proper grounding and follow local electrical codes during installation.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the operating mode: Grid-tied, Off-grid, or Hybrid.
Set the output voltage and frequency according to local standards.
Configure communication settings if applicable.
Save settings and restart the inverter.

CAUTION! Ensure all settings are correct before operating the inverter.

Specifications

Model: GD200-280G/315P-4
Input Voltage: 200-600V DC
Output Power: 200-315 kW
Efficiency: Up to 98%
Operating Temperature: -25°C to 60°C
Protection Class: IP65
Weight: 50 kg

Controls and Settings

Access settings via the user interface. Key controls include power on/off, mode selection, and parameter adjustments.

Remote Monitoring: Use the mobile app or web interface for remote access and monitoring.

Connecting Devices

Ensure the inverter is powered off before connecting any devices.

Connect solar panels to the DC input terminals.
Connect the AC output to the electrical grid or load.
Use communication ports for monitoring and control.

Tip: Follow the wiring diagram provided in the manual for correct connections.

Operating the Inverter

Monitor the inverter's performance through the display or remote interface.

Check input and output voltages regularly.
Monitor system performance and efficiency.
Adjust settings as necessary for optimal operation.

WARNING! Do not operate the inverter outside of specified limits.

Maintenance

Regular maintenance is essential for optimal performance.

Inspect connections and wiring for wear or damage.
Clean the inverter casing to prevent dust accumulation.
Check for any error codes on the display and address them promptly.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the certification documents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power output	DC input disconnected	Check and reconnect DC input.
Error code displayed	Fault condition	Refer to the error code section in the manual.
Low efficiency	Incorrect settings	Verify and adjust settings as needed.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.

Reset: Use the reset button if available to restore factory settings.

Service: For support, contact INVT customer service.