INVT Inverter GD200L-045P-4 Manual

The INVT GD200L-045P-4 is a high-performance inverter designed for various applications, including solar energy systems and industrial automation. It features advanced control algorithms, high efficiency, and robust protection mechanisms. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: High-efficiency inverter, user-friendly interface, multiple protection features, and compatibility with various energy sources.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below.

1. Choose a suitable location: Ensure adequate ventilation and avoid direct sunlight.
2. Mount the inverter securely: Use appropriate hardware for the mounting surface.
3. Connect input and output: Follow wiring diagrams provided in the manual.
4. Power on the inverter: Ensure all connections are secure before powering on.

WARNING! Ensure all safety precautions are followed during installation.

First-Time Setup

Power on the inverter and follow the on-screen prompts for initial configuration.

1. Select input source: Choose between solar, grid, or battery.
2. Set output parameters: Adjust voltage and frequency settings as needed.
3. Configure monitoring settings: Set up alerts and notifications.
4. Save settings: Ensure all configurations are saved before exiting.

CAUTION! Double-check all settings to ensure proper operation.

Specifications

• Model: GD200L-045P-4.
• Input Voltage: 200-600V DC.
• Output Power: 45kW.
• Efficiency: Up to 98%.
• Operating Temperature: -10°C to 50°C.
• Protection Class: IP65.
• Weight: 25 kg.

Controls and Settings

Access settings via the user interface. Key controls include power on/off, input selection, and monitoring options.

Remote Monitoring: Use the mobile app for real-time monitoring and control.

Settings: Adjust parameters for performance optimization and safety features.

Connecting Devices

Ensure proper connections for optimal performance.

1. Turn off the inverter before connecting devices.
2. Match cables to ports according to the wiring diagram.
3. Power on the inverter after all connections are secure.

Tip: Double-check all connections to prevent damage.

Operating the Inverter

Follow these steps to operate the inverter effectively.

1. Press the power button to turn on the inverter.
2. Select the desired input source using the user interface.
3. Monitor performance through the display or mobile app.
4. Adjust settings as necessary for optimal operation.

WARNING! Do not operate the inverter in wet or hazardous conditions.

Safety Features

The inverter is equipped with multiple safety features to protect against various risks.

• Overvoltage protection: Prevents damage from excessive voltage.
• Overcurrent protection: Safeguards against high current situations.
• Thermal protection: Shuts down the inverter if overheating occurs.
• Ground fault protection: Detects and mitigates ground faults.

Care & Maintenance

Regular maintenance is essential for optimal performance.

CAUTION! Always disconnect power before performing maintenance.

• Clean the inverter casing with a dry cloth.
• Check connections regularly for wear or damage.
• Ensure ventilation is not obstructed.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the regulatory documentation.

Troubleshooting

Reset: Use the reset button if available to restore factory settings.

Service: For support, contact INVT customer service.