INVT Inverter GD200L-350P-4 Manual

The INVT Inverter GD200L-350P-4 is a high-performance inverter designed for various applications, including solar energy systems and industrial automation. It features advanced control algorithms, high efficiency, and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-efficiency inverter, LCD display, multiple communication interfaces, and robust protection features.

Feature	Description
High Efficiency	Up to 98% efficiency for optimal energy conversion
LCD Display	User-friendly interface for monitoring and settings
Multiple Communication Interfaces	Supports RS485, CAN, and Ethernet for connectivity
Robust Protection	Over-voltage, under-voltage, and over-temperature protection
Compact Design	Space-saving design for easy installation

Installation

Carefully unpack the inverter and inspect for any damage. Follow the installation guidelines below.

Mount the inverter on a stable surface, ensuring proper ventilation.
Connect the DC input from the solar panels or battery.
Connect the AC output to the electrical system.
Plug into the power source and ensure all connections are secure.

WARNING! Ensure proper grounding and follow local electrical codes.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the operating mode: Grid-tie, Off-grid, or Hybrid.
Set the output voltage and frequency according to local standards.
Configure communication settings if applicable.
Save settings and restart the inverter.

CAUTION! Ensure all settings are correct before operating.

Specifications

Model: GD200L-350P-4
Input Voltage: 200V - 600V DC
Output Power: 350W
Efficiency: Up to 98%
Operating Temperature: -10°C to 60°C
Dimensions: 300mm x 200mm x 100mm
Weight: 5 kg

Controls and Settings

Access settings via the LCD display. Use the buttons to navigate through the menu.

Key Controls: Power, Mode Selection, Settings, and Reset.

Monitor: Input/output voltage, current, and operational status on the display.

Connecting Devices

Ensure the inverter is powered off before making any connections.

Connect the DC source to the inverter's input terminals.
Connect the AC output to the load or electrical panel.
Verify all connections are secure and correct.

Tip: Use appropriate wire sizes for connections to avoid overheating.

Operating the Inverter

Once set up, power on the inverter and monitor its performance.

Check the LCD display for operational status.
Adjust settings as needed for optimal performance.
Monitor input/output parameters regularly.

WARNING! Do not exceed the rated specifications to avoid damage.

Maintenance

Regular maintenance is essential for optimal performance.

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of wear or damage.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the product documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No output	Power source issue	Check DC input connections and voltage.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Error code displayed	Fault condition	Refer to the manual for error code definitions.
Low efficiency	Incorrect settings	Verify settings and adjust as necessary.

Reset: Use the reset button if available to restore factory settings.

Service: For support, contact INVT customer service.