INVT Inverter GD200L-5R5G/7R5P-4 Manual

The INVT Inverter GD200L-5R5G/7R5P-4 is a high-performance inverter designed for various applications, including renewable energy systems and industrial automation. This inverter features advanced control algorithms, high efficiency, and robust protection mechanisms. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Safety Features 9. Maintenance & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-efficiency inverter, LCD display, multiple input/output options, built-in protections, and user-friendly interface.

Feature	Description
High Efficiency	Maximizes energy conversion with minimal losses.
LCD Display	Provides real-time monitoring of inverter status and performance.
Multiple Inputs/Outputs	Supports various configurations for flexibility in installation.
Built-in Protections	Includes over-voltage, under-voltage, and over-temperature protections.
User-Friendly Interface	Easy navigation and configuration through the LCD display.

Installation

Carefully unpack the inverter and inspect for any damage. Install the inverter in a well-ventilated area.

Mount the inverter securely on a wall or flat surface.
Connect the DC input from the solar panels or battery.
Connect the AC output to the electrical system.
Ensure all connections are tight and secure.

WARNING! Ensure proper ventilation to avoid overheating. Follow local electrical codes for installation.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the input source: Solar or battery.
Set the output voltage and frequency according to your system requirements.
Configure any additional settings as needed.
Save the settings and restart the inverter.

CAUTION! Ensure all connections are correct before powering on.

Specifications

Input Voltage: 48V DC or 96V DC.
Output Power: 2000W continuous.
Efficiency: Up to 95%.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.
Dimensions: 400mm x 300mm x 150mm.
Weight: 10 kg.

Controls and Settings

Access settings via the LCD display. Use the navigation buttons to adjust parameters.

Key Controls: Power button, navigation buttons, enter button, and reset button.

Settings include: Input source selection, output voltage adjustment, and system monitoring options.

Connecting Devices

Ensure the inverter is powered off before making connections.

Connect the DC source to the inverter's input terminals.
Connect the AC output to the load or electrical panel.
Verify all connections are secure before powering on.

Tip: Use appropriate gauge wiring to prevent voltage drop.

Operating the Inverter

Once powered on, the inverter will automatically detect the input source and begin operation.

Monitor the LCD display for performance metrics.
Adjust settings as necessary for optimal performance.
Regularly check for any error messages or alerts.

WARNING! Do not exceed the rated output power to avoid damage.

Safety Features

The inverter is equipped with multiple safety features to protect both the unit and connected devices.

Over-voltage protection.
Under-voltage protection.
Over-temperature protection.
Short-circuit protection.

Maintenance & Cleaning

Regular maintenance is essential for optimal performance. Keep the inverter clean and free from dust.

CAUTION! Unplug the inverter before cleaning. Use a dry cloth only; do not use liquids.

Regulatory Information

This inverter complies with international safety and performance standards. For support, visit the manufacturer's website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Disconnected DC source	Check connections and ensure DC source is active.
Error message on display	Over-voltage or over-temperature	Allow inverter to cool down; check input voltage.
Low output power	Exceeding rated capacity	Reduce load to within rated limits.
Inverter shuts down	Protection activated	Identify and resolve the cause of the fault.

Reset: Use the reset button to restore factory settings if necessary.

Service: For support, contact the manufacturer or authorized service center.