INVT Inverter GD300-030G-6 Manual

The INVT GD300-030G-6 is a high-performance inverter designed for various applications, including solar energy systems and industrial automation. It features advanced control technology, high efficiency, and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Safety Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-efficiency inverter, user-friendly display, multiple protection features, and communication interfaces.

FeatureDescription
High EfficiencyMaximizes energy conversion with minimal losses.
User-Friendly InterfaceEasy-to-read display for monitoring and settings adjustment.
Multiple Protection FeaturesOvervoltage, undervoltage, and overcurrent protection.
Communication InterfacesSupports RS485 and CAN communication protocols.
Compact DesignSpace-saving design suitable for various installations.

Installation

Carefully unpack the inverter and inspect for any damage. Install in a well-ventilated area.

  1. Mount the inverter on a stable surface using appropriate hardware.
  2. Connect the DC input from the solar panels or battery.
  3. Connect the AC output to the electrical system.
  4. Ensure all connections are secure and insulated.

WARNING! Ensure proper ventilation to avoid overheating. Follow local electrical codes.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

  1. Select the operating mode: Grid-tied or Off-grid.
  2. Set the input voltage and frequency according to your system.
  3. Adjust the output settings as needed.
  4. Save the configuration and restart the inverter.

CAUTION! Double-check all connections before powering on.

Specifications

Controls and Settings

Access the settings via the user interface. Use the buttons to navigate through the menu options.

Display: Shows input/output voltage, current, and status indicators.

Settings include: Operating mode, voltage settings, and communication settings.

Connecting Devices

Ensure the inverter is powered off before making any connections.

  1. Connect the DC source to the inverter’s input terminals.
  2. Connect the AC output to the load or electrical grid.
  3. Verify all connections are correct and secure.

Tip: Use appropriate wire sizes for connections to ensure safety and efficiency.

Operating the Inverter

Once powered on, the inverter will automatically start operating based on the configured settings.

  1. Monitor the display for operational status and alerts.
  2. Adjust settings as necessary using the user interface.
  3. Regularly check for firmware updates to ensure optimal performance.

WARNING! Do not operate the inverter outside of specified parameters.

Safety Features

The inverter includes multiple safety features to protect against electrical faults.

Care & Maintenance

Regular maintenance is essential for optimal performance.

Keep the inverter clean and free from dust. Inspect connections periodically.

CAUTION! Disconnect power before performing any maintenance.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the product documentation.

Troubleshooting

SymptomPossible CauseCorrective Action
No power outputDC input disconnectedCheck DC connections and ensure proper voltage.
Error code displayedFault conditionRefer to the user manual for error code definitions.
OverheatingInsufficient ventilationEnsure proper airflow around the inverter.
Low efficiencyIncorrect settingsCheck and adjust settings as per specifications.

Reset: Use the reset button if available to restore factory settings.

Service: Contact INVT support for assistance.

INVT Inverter GD300-030G-6 Manual © - All Rights Reserved 2026