INVT Inverter GD300-132G-6 Manual

The INVT Inverter GD300-132G-6 is a high-performance inverter designed for various applications, including solar energy systems and industrial automation. It features advanced control algorithms, high efficiency, and robust protection mechanisms. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Safety Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-efficiency inverter, LCD display, multiple input/output options, robust protection features, and remote monitoring capabilities.

Feature	Description
High Efficiency	Maximizes energy conversion with minimal losses.
LCD Display	Provides real-time monitoring of system performance.
Multiple Input/Output Options	Supports various configurations for flexibility.
Protection Features	Overvoltage, overcurrent, and thermal protection.
Remote Monitoring	Allows for system management from a distance.

Installation

Unpack and inspect contents. Ensure a stable and ventilated installation location.

Mount the inverter securely on a wall or platform.
Connect the DC input from the solar panels or battery.
Connect the AC output to the electrical system.
Ensure all connections are tight and secure.

WARNING! Ensure proper ventilation to avoid overheating. Follow all safety guidelines during installation.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the operating mode: Grid-tied or Off-grid.
Set the input voltage and frequency according to your system.
Configure the output settings for your electrical system.
Save the settings and restart the inverter.

CAUTION! Ensure all connections are correct before powering on.

Specifications

Model: GD300-132G-6.
Input Voltage: 300V - 800V DC.
Output Power: 132 kW.
Efficiency: Up to 98%.
Operating Temperature: -25°C to 60°C.
Protection Rating: IP65.
Communication: RS485, Ethernet.

Controls and Settings

Access settings via the LCD display. Use the navigation buttons to scroll through options.

Settings: Operating mode, input/output configurations, and monitoring settings.

Monitor: Real-time data on performance, voltage, and current.

Connecting Devices

Connect solar panels, batteries, and electrical loads to the inverter.

Ensure the inverter is powered off before making connections.
Follow the wiring diagram provided in the manual.
Double-check all connections for correctness.

Tip: Use appropriate gauge wiring to prevent overheating.

Operating the Inverter

To operate the inverter, ensure all connections are secure and power on the unit.

Monitor the LCD display for operational status.
Adjust settings as necessary for optimal performance.
Regularly check for any error messages or alerts.

WARNING! Do not operate the inverter without proper connections.

Safety Features

The inverter is equipped with multiple safety features to protect against faults.

Overvoltage protection.
Overcurrent protection.
Thermal protection.
Ground fault detection.

Care & Maintenance

Regular maintenance is essential for optimal performance. Keep the inverter clean and free from dust.

CAUTION! Disconnect power before performing any maintenance.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, visit the manufacturer's website.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Disconnected input	Check all connections and ensure input is connected.
Error message on display	Fault detected	Refer to the manual for specific error codes and solutions.
Low output	Incorrect settings	Verify settings and adjust as necessary.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.

Reset: Follow the reset procedure in the manual if necessary.

Service: Contact customer support for further assistance.