INVT Inverter GD300-220G-6 Manual

The INVT Inverter GD300-220G-6 is a high-performance inverter designed for various applications including solar energy systems and industrial automation. It features advanced control algorithms, high efficiency, and robust protection mechanisms. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Safety Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High efficiency, advanced control algorithms, multiple protection features, user-friendly interface.

FeatureDescription
High EfficiencyMaximizes energy conversion with minimal losses.
Advanced ControlUtilizes sophisticated algorithms for optimal performance.
Multiple ProtectionsIncludes over-voltage, under-voltage, over-temperature, and short-circuit protections.
User InterfaceEasy-to-read display and intuitive controls for user convenience.
Compact DesignSpace-saving design suitable for various installations.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below.

  1. Choose a suitable location: Ensure adequate ventilation and avoid direct sunlight.
  2. Mount the inverter securely: Use appropriate mounting hardware.
  3. Connect the power source: Follow the wiring diagram provided in the manual.
  4. Ground the inverter: Ensure proper grounding to prevent electrical hazards.

WARNING! Ensure all connections are secure to avoid damage.

First-Time Setup

Power on the inverter and follow the on-screen prompts for initial configuration.

  1. Set the operating mode: Choose between grid-tied or off-grid.
  2. Configure voltage settings: Set according to your system requirements.
  3. Adjust frequency settings: Ensure compatibility with your devices.
  4. Save settings: Confirm and save your configurations.

CAUTION! Double-check all settings before saving.

Specifications

Controls and Settings

Access settings via the user interface. Key controls include power on/off, mode selection, and configuration settings.

Display: Shows operational status and error messages.

Settings: Adjust parameters such as voltage, frequency, and operating mode.

Connecting Devices

Follow these steps to connect devices to the inverter.

  1. Turn off the inverter before connecting devices.
  2. Match cables to ports as per the wiring diagram.
  3. Power on the inverter after all connections are secure.

Tip: Always check connections before powering on.

Operating the Inverter

To operate the inverter, follow these steps:

  1. Power on the inverter using the main switch.
  2. Select the desired operating mode.
  3. Monitor the display for operational status.
  4. Adjust settings as necessary for optimal performance.

WARNING! Do not operate the inverter in wet conditions.

Safety Features

The inverter includes several safety features to protect both the device and connected equipment.

Care & Maintenance

Regular maintenance is essential for optimal performance. Follow these guidelines:

CAUTION! Unplug the inverter before performing maintenance.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the regulatory documentation.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerPower source issueCheck power connections and source.
Error message on displayConfiguration errorReview settings and adjust as necessary.
OverheatingPoor ventilationEnsure adequate airflow around the inverter.
Inverter not chargingConnection issueCheck all connections and ensure they are secure.

Reset: Refer to the user manual for reset instructions.

Support: For assistance, contact INVT support or visit the official website.

INVT Inverter GD300-220G-6 Manual © - All Rights Reserved 2026