INVT Inverter GD350-022G-4 GD350-030G-4 Manual

The INVT Inverter GD350-022G-4 and GD350-030G-4 are advanced inverter solutions designed for various applications, providing reliable power conversion and management. These inverters are equipped with features such as high efficiency, multiple protection mechanisms, and user-friendly interfaces. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-efficiency power conversion, multiple protection features, LCD display, user-friendly interface, and remote monitoring capabilities.

FeatureDescription
High EfficiencyMaximizes energy conversion with minimal losses.
Multiple ProtectionsOver-voltage, under-voltage, over-temperature, and short-circuit protection.
LCD DisplayProvides real-time information on inverter status and performance.
User-Friendly InterfaceEasy navigation for settings and configurations.
Remote MonitoringAllows monitoring and control from a distance.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below:

  1. Choose a suitable location: Ensure adequate ventilation and avoid direct sunlight.
  2. Mount the inverter securely: Use appropriate mounting hardware.
  3. Connect input and output terminals: Follow wiring diagrams provided in the manual.
  4. Plug into AC power: Ensure the power supply matches the inverter specifications.

WARNING! Ensure all connections are secure to prevent electrical hazards.

First-Time Setup

Power on the inverter and follow the setup prompts displayed on the LCD.

  1. Select input source: Choose between solar, grid, or battery.
  2. Set output voltage: Adjust according to your load requirements.
  3. Configure protection settings: Set parameters for over-voltage and under-voltage.
  4. Save settings: Confirm and save your configurations.

CAUTION! Ensure all settings are correct before saving.

Specifications

Controls and Settings

Access settings via the LCD display. Key controls include:

Power Button: Turns the inverter on/off.

Menu Button: Accesses settings and configurations.

Up/Down Buttons: Navigate through options.

Enter Button: Confirms selections.

Connecting Devices

Follow these steps to connect devices:

  1. Turn off the inverter before connecting devices.
  2. Connect the load to the output terminals.
  3. Ensure all connections are tight and secure.
  4. Power on the inverter and check for proper operation.

Tip: Always refer to the wiring diagram for correct connections.

Operating the Inverter

To operate the inverter:

  1. Ensure the inverter is powered on.
  2. Select the desired input source using the menu.
  3. Monitor the output on the LCD display.
  4. Adjust settings as necessary for optimal performance.

WARNING! Do not overload the inverter beyond its rated capacity.

Maintenance

Regular maintenance is essential for longevity:

Regulatory Information

This inverter complies with international safety and performance standards. For detailed regulatory information, refer to the documentation provided with the product.

Troubleshooting

SymptomPossible CauseCorrective Action
No outputPower supply issueCheck input connections and power source.
Overload alarmExcessive loadReduce load to within rated capacity.
LCD not displayingPower failureCheck power connections and reset the inverter.
OverheatingPoor ventilationEnsure adequate airflow around the inverter.

Reset: Refer to the user manual for reset instructions.

Support: For assistance, contact customer service or visit the manufacturer's website.

INVT Inverter GD350-022G-4 GD350-030G-4 Manual © - All Rights Reserved 2026