INVT Inverter GD350-075G-4 Manual

The INVT Inverter GD350-075G-4 is a high-performance inverter designed for various applications, including solar energy systems and industrial automation. It features advanced control algorithms, high efficiency, and robust protection mechanisms. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Safety Features 9. Maintenance & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-efficiency inverter, advanced control algorithms, multiple protection features, user-friendly interface.

FeatureDescription
High EfficiencyUp to 98% efficiency for optimal energy conversion
Advanced ControlSmart algorithms for improved performance
Protection MechanismsOvervoltage, overcurrent, and thermal protection
User InterfaceIntuitive display for easy monitoring and control
Compact DesignSpace-saving design for easy installation

Installation

Carefully unpack the inverter and inspect for any damage. Install the inverter in a well-ventilated area.

  1. Mount the inverter on a stable surface using appropriate hardware.
  2. Connect the DC input from the solar panels or battery.
  3. Connect the AC output to the electrical system.
  4. Ensure all connections are secure and insulated.

WARNING! Ensure proper ventilation to avoid overheating. Follow all safety guidelines during installation.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

  1. Select the operating mode: Grid-tied or Off-grid.
  2. Set the input voltage and frequency according to your system.
  3. Configure the output settings for your electrical load.
  4. Save the settings and restart the inverter.

CAUTION! Double-check all settings before saving to avoid operational issues.

Specifications

Controls and Settings

Access the settings via the user interface. Key controls include power on/off, mode selection, and settings adjustment.

Display: Shows operational status, input/output voltage, and error messages.

Settings include: Operating mode, voltage settings, and protection parameters.

Connecting Devices

Ensure all devices are powered off before making connections.

  1. Connect the DC source to the inverter's input terminals.
  2. Connect the AC output to the load or electrical panel.
  3. Verify all connections are secure and properly insulated.

Tip: Use appropriate gauge wiring for all connections to ensure safety and efficiency.

Operating the Inverter

To operate the inverter, ensure it is properly set up and powered on.

  1. Monitor the display for operational status and performance metrics.
  2. Adjust settings as necessary for optimal performance.
  3. Regularly check for any error messages and address them promptly.

WARNING! Do not operate the inverter without proper setup and configuration.

Safety Features

The inverter includes several safety features to protect both the device and connected equipment.

Maintenance & Cleaning

Regular maintenance is essential for optimal performance. Keep the inverter clean and free from dust.

CAUTION! Always unplug the inverter before performing maintenance or cleaning.

Regulatory Information

This inverter complies with relevant safety and performance standards. For detailed information, refer to the product documentation.

Troubleshooting

SymptomPossible CauseCorrective Action
No outputPower source disconnectedCheck DC input connections
Error message on displayOvervoltage or overheatingAllow to cool; check input voltage
Low efficiencyIncorrect settingsReview and adjust settings
Inverter shuts downOvercurrent protection activatedReduce load and restart

Reset: Follow the reset procedure in the user manual if necessary.

Support: For assistance, contact INVT support or visit the official website.

INVT Inverter GD350-075G-4 Manual © - All Rights Reserved 2026