INVT Inverter GD350-185G-4 Manual

The INVT GD350-185G-4 is a high-performance inverter designed for various applications, including solar energy systems and industrial automation. It features advanced technology for efficient power conversion, ensuring reliable operation and energy savings. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: High-efficiency power conversion, built-in protection features, user-friendly interface, and remote monitoring capabilities.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below.

1. Choose a suitable location: Ensure adequate ventilation and avoid direct sunlight.
2. Mount the inverter securely: Use appropriate mounting hardware.
3. Connect input and output: Follow wiring diagrams provided in the manual.
4. Power up the inverter: Ensure all connections are secure before powering on.

WARNING! Ensure proper grounding to avoid electrical hazards.

First-Time Setup

Power on the inverter and follow the setup wizard on the display.

1. Select language: Choose your preferred language for the interface.
2. Set system parameters: Input battery type, voltage, and other relevant settings.
3. Configure monitoring options: Set up alerts and notifications for performance tracking.

CAUTION! Double-check all settings before finalizing the setup.

Specifications

• Input Voltage: 48V DC.
• Output Power: 350W.
• Efficiency: Up to 95%.
• Operating Temperature: -10°C to 50°C.
• Dimensions: 300mm x 200mm x 100mm.
• Weight: 5 kg.

Controls and Settings

Access settings via the user interface. Key controls include power on/off, mode selection, and monitoring options.

Remote: Use the remote control for convenient operation from a distance.

Settings include: Output mode, battery settings, and system diagnostics.

Connecting Devices

Follow these steps to connect devices to the inverter.

1. Turn off the inverter before making connections.
2. Connect the battery: Ensure correct polarity.
3. Connect the load: Use appropriate cables for the load requirements.
4. Power on the inverter and check for proper operation.

Tip: Use high-quality cables to minimize voltage drop.

Operating the Inverter

To operate the inverter, follow these steps:

1. Power on the inverter using the main switch.
2. Select the desired operating mode (e.g., inverter mode, charger mode).
3. Monitor the output via the display for performance metrics.
4. Adjust settings as necessary for optimal performance.

WARNING! Do not exceed the rated output to avoid damage.

Safety Features

The inverter is equipped with several safety features to protect against faults.

• Overvoltage protection
• Overcurrent protection
• Short-circuit protection
• Thermal shutdown

Maintenance & Cleaning

Regular maintenance is essential for optimal performance.

• Inspect connections regularly for corrosion.
• Clean the inverter casing with a dry cloth.
• Ensure ventilation openings are free from obstructions.

CAUTION! Unplug the inverter before performing any maintenance.

Regulatory Information

This inverter complies with relevant safety and performance standards. For support, visit the official INVT website or contact customer service.

Troubleshooting

Reset: Follow the reset procedure in the user interface if necessary.

Service: For assistance, contact INVT customer support.