INVT Inverter Goodrive 35 Series Manual

The INVT Goodrive 35 Series Inverter is designed for various applications, providing high performance and reliability. It features advanced control algorithms, multiple communication protocols, and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-performance inverter, user-friendly interface, multiple communication options, and robust protection features.

Feature	Description
Advanced Control Algorithms	Ensures optimal performance and efficiency
Multiple Communication Protocols	Supports Modbus, CANopen, and more
User-Friendly Interface	Easy to navigate and configure settings
Robust Protection Features	Over-voltage, under-voltage, and over-current protection
Compact Design	Space-saving and easy to install

Installation

Carefully unpack the inverter and inspect for any damage. Follow the installation guidelines to ensure proper setup.

Mount the inverter on a stable surface, ensuring adequate ventilation.
Connect the input power supply according to the wiring diagram.
Connect the output to the motor or load.
Power on the inverter and check for proper operation.

WARNING! Ensure all connections are secure to avoid electrical hazards.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure initial settings.

Select the motor type and parameters.
Set the operating frequency and voltage.
Configure communication settings if applicable.
Save the settings and perform a test run.

CAUTION! Ensure all safety measures are in place before operating.

Specifications

Input Voltage: 220V AC.
Output Voltage: Adjustable up to 400V AC.
Power Range: 0.75kW to 15kW.
Control Mode: V/F control, vector control.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.

Controls and Settings

Access settings via the user interface or remote control. Key controls include power, frequency adjustment, and parameter settings.

Remote: Start/stop, speed control, and parameter adjustments.

Settings include motor parameters, communication settings, and protection features.

Connecting Devices

Ensure the inverter is powered off before making connections.

Connect the motor to the output terminals.
Connect the control panel if applicable.
Ensure all connections are tight and secure.

Tip: Double-check wiring against the provided diagram.

Operating the Inverter

Follow the operational guidelines for safe and efficient use.

Start the inverter using the power button.
Adjust the speed and frequency as needed.
Monitor the display for any error messages.
Stop the inverter when not in use.

WARNING! Do not exceed the rated capacity of the inverter.

Maintenance

Regular maintenance is essential for optimal performance.

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust buildup.
Check for any signs of wear or damage.

Regulatory Information

This inverter complies with international safety and performance standards. For support, visit the official INVT website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check input power connections.
No output voltage	Incorrect wiring	Verify output connections.
Error code displayed	Fault condition	Refer to the error code guide in the manual.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.

Reset: Follow the reset procedure in the user interface if necessary.

Service: For support, contact INVT customer service.