INVT Inverter Goodrive GD300-19-015G-4 Manual

The INVT Goodrive GD300-19-015G-4 is a high-performance inverter designed for various applications, providing reliable power conversion and control. This manual covers essential information regarding safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Advanced control algorithms, multiple protection features, user-friendly interface, and compact design.

Feature	Description
Advanced Control	Utilizes vector control for precise motor control.
Protection Features	Over-voltage, under-voltage, over-current, and thermal protection.
User Interface	LCD display for easy monitoring and configuration.
Compact Design	Space-saving design suitable for various installations.
Communication Protocols	Supports Modbus and other communication standards.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Mount the inverter on a stable surface, ensuring proper ventilation.
Connect the input power supply according to the wiring diagram.
Connect the output to the motor or load as specified.
Ensure all connections are secure and insulated.

WARNING! Ensure the inverter is powered off during installation to avoid electric shock.

First-Time Setup

Power on the inverter and follow the setup wizard on the LCD display.

Select the motor type and parameters.
Set the operational modes as per application requirements.
Adjust the parameters for voltage, frequency, and acceleration.
Save the settings and perform a test run.

CAUTION! Verify all settings before operating the inverter to prevent damage.

Specifications

Input Voltage: 220V AC.
Output Power: 1.5 kW.
Frequency Range: 0-400 Hz.
Control Method: Vector control.
Protection Class: IP20.
Operating Temperature: -10°C to 50°C.

Controls and Settings

Access the settings via the LCD display. Key controls include:

Buttons: Power, Up/Down, Enter, Escape.

Settings include motor parameters, operational modes, and protection settings.

Connecting Devices

Ensure proper connections for optimal performance.

Turn off the inverter and devices before connecting.
Match cables to the appropriate terminals.
Double-check all connections before powering on.

Tip: Use shielded cables for signal integrity.

Operating the Inverter

Follow these steps to operate the inverter:

Power on the inverter using the main switch.
Select the desired operational mode via the LCD.
Monitor the performance through the display.
Adjust settings as necessary during operation.

WARNING! Do not exceed the rated output to prevent damage.

Maintenance

Regular maintenance is essential for longevity.

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of wear or damage.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the certification documents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power supply issue	Check input connections and power source.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Faulty output	Incorrect settings	Verify motor parameters and settings.
Display not working	Power issue	Check power supply and connections.

Reset: Refer to the manual for reset procedures if necessary.

Support: Contact INVT support for further assistance.