INVT Inverter Goodrive GD300-19-018G-4 Manual

The INVT Goodrive GD300-19-018G-4 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, robust design, and a user-friendly interface. This manual provides essential information on installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of the inverter.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Safety Features 9. Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key features include: high efficiency, compact design, multiple communication protocols, and built-in protection mechanisms.

Feature	Description
High Efficiency	Reduces energy consumption and operational costs.
Compact Design	Space-saving design suitable for various installations.
Multiple Protocols	Supports Modbus, CANopen, and other communication protocols.
Built-in Protection	Overvoltage, undervoltage, and overcurrent protection features.
User-Friendly Interface	Intuitive display for easy monitoring and adjustments.

Installation

Ensure proper installation to maximize performance and safety. Follow the guidelines below:

Mount the inverter on a stable surface, ensuring adequate ventilation.
Connect the input power supply according to the wiring diagram.
Ensure all connections are secure and insulated.
Power on the inverter and check for any error codes.

WARNING! Ensure the inverter is installed by qualified personnel to avoid electrical hazards.

First-Time Setup

Follow these steps for initial configuration:

Power on the inverter and access the setup menu.
Select the appropriate motor parameters based on your application.
Configure communication settings if applicable.
Save the settings and perform a test run.

CAUTION! Double-check all settings before proceeding to avoid operational issues.

Specifications

Input Voltage: 380V AC.
Output Power: 18.5 kW.
Control Method: V/F control, vector control.
Protection Level: IP20.
Operating Temperature: -10°C to 50°C.
Weight: 10 kg.

Controls and Settings

The inverter features a digital display for monitoring and adjustments. Key controls include:

Buttons: Start, Stop, Up, Down, Enter.

Display: Shows operational status, error codes, and parameter settings.

Connecting Devices

Ensure proper connections to external devices:

Turn off the inverter before making connections.
Connect the motor leads to the output terminals.
Connect control signals as per the application requirements.
Power on the inverter and check for proper operation.

Tip: Always refer to the wiring diagram for accurate connections.

Operating the Inverter

To operate the inverter:

Press the Start button to initiate operation.
Monitor the display for any alerts or warnings.
Adjust speed and torque settings as needed.
Press Stop to halt operation safely.

WARNING! Do not operate the inverter without proper load connected.

Safety Features

The inverter includes several safety features:

Overvoltage protection.
Overcurrent protection.
Thermal protection to prevent overheating.
Short-circuit protection.

Maintenance

Regular maintenance is essential for optimal performance:

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of wear or damage.
Update firmware as necessary.

CAUTION! Always disconnect power before performing maintenance.

Regulatory Information

This inverter complies with international safety standards and regulations. For detailed compliance information, refer to the product certification documents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check input power connections and fuses.
Error code displayed	Fault condition	Refer to the error code list in the manual.
Motor not running	Incorrect wiring	Verify motor connections and settings.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.

Reset: Use the reset function in the menu if available.

Support: For assistance, contact INVT support at www.invt.com or call 1-800-555-0199.