INVT Inverter Goodrive GD300-19-022G-4 Manual

The INVT Goodrive GD300-19-022G-4 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, robust protection mechanisms, and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating Instructions 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: High-efficiency inverter, user-friendly interface, multiple control modes, built-in protections, and communication options.

Feature	Description
High Efficiency	Optimized for energy savings and performance.
Multiple Control Modes	Supports V/F control, vector control, and more.
Built-in Protections	Over-voltage, under-voltage, over-current, and thermal protection.
User Interface	Intuitive display for easy operation and monitoring.
Communication Options	Supports RS485, CAN, and other protocols for integration.

Installation

Ensure proper installation to maximize performance and safety.

Mount the inverter securely in a well-ventilated area.
Connect the input power supply according to the wiring diagram.
Connect the output to the motor or load.
Ensure all connections are tight and secure.

WARNING! Follow all safety guidelines during installation to prevent injury or damage.

First-Time Setup

Power on the inverter and follow the setup wizard on the display.

Select the appropriate control mode for your application.
Set parameters such as motor type, voltage, and frequency.
Save settings and perform a test run to ensure proper operation.

CAUTION! Ensure all settings are correct before operating the inverter.

Specifications

Input Voltage: 380V AC.
Output Voltage: 0-380V AC.
Power Rating: 22 kW.
Control Mode: V/F control, vector control.
Protection Class: IP20.
Operating Temperature: -10°C to 50°C.

Controls and Settings

Access settings via the user interface. Key controls include:

Power button
Parameter setting buttons
Display for monitoring
Communication ports for external devices

Connecting Devices

Follow these steps to connect devices:

Ensure the inverter is powered off before making connections.
Connect the motor or load to the output terminals.
Connect the power supply to the input terminals.
Check all connections before powering on the inverter.

Tip: Use appropriate cables and connectors for your application.

Operating Instructions

To operate the inverter:

Power on the inverter using the power button.
Select the desired operation mode.
Start the motor/load using the start command.
Monitor performance via the display.

WARNING! Do not exceed the rated specifications during operation.

Maintenance

Regular maintenance is essential for optimal performance:

Inspect connections and wiring regularly.
Clean the inverter casing to prevent dust buildup.
Check for any signs of wear or damage.

Safety Information

Always adhere to safety guidelines:

Disconnect power before servicing.
Use appropriate personal protective equipment (PPE).
Follow local electrical codes and regulations.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	No input power	Check power supply connections.
Overcurrent alarm	Load exceeds rating	Reduce load or check for faults.
No output voltage	Faulty connections	Inspect output connections.
Display not functioning	Power supply issue	Check internal power supply.

Reset: Follow the reset procedure in the user interface if available.

Service: For support, contact INVT customer service.