INVT Inverter Goodrive GD300-19-030G-4 Manual

The INVT Goodrive GD300-19-030G-4 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, robust protection functions, and a user-friendly interface. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Advanced control algorithms, built-in protection features, user-friendly interface, multiple communication protocols.

Feature	Description
Advanced Control	Ensures precise motor control and efficiency
Protection Functions	Over-voltage, under-voltage, over-current, and thermal protection
User Interface	Intuitive display for easy operation and monitoring
Communication Protocols	Supports Modbus, CANopen, and other protocols
Compact Design	Space-saving design for easy installation

Installation

Ensure proper installation for optimal performance. Follow the steps below:

Mount the inverter securely on a stable surface.
Connect the input power supply according to the wiring diagram.
Connect the motor to the inverter output terminals.
Ensure all connections are tight and secure.

WARNING! Ensure power is off before making any connections to avoid electric shock.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the motor type and parameters in the setup menu.
Set the desired operating frequency and voltage.
Adjust acceleration and deceleration times as needed.
Save the settings and exit the setup menu.

CAUTION! Double-check all settings before starting the inverter.

Specifications

Input Voltage: 380V AC ± 15%
Output Voltage: 0-380V AC
Power Range: 0.75kW to 30kW
Control Method: V/F control, vector control
Operating Temperature: -10°C to 50°C
Protection Level: IP20

Controls and Settings

Access the inverter settings through the user interface. Key controls include:

Display: Shows operating status and parameters.

Buttons: Navigate through menus and adjust settings.

Indicators: LED indicators for power, fault, and operation status.

Connecting Devices

Follow these steps to connect external devices:

Turn off the inverter before making any connections.
Connect external control devices as per the wiring diagram.
Ensure all connections are correct and secure.

Tip: Use shielded cables for communication connections to reduce interference.

Operating the Inverter

To operate the inverter:

Press the power button to turn on the inverter.
Select the desired operating mode using the user interface.
Monitor the operating parameters on the display.
Adjust settings as necessary during operation.

WARNING! Do not operate the inverter outside of specified limits.

Maintenance

Regular maintenance is essential for optimal performance:

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of wear or damage.
Ensure proper ventilation around the inverter.

CAUTION! Always disconnect power before performing maintenance.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed regulatory information, refer to the product certification documents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check input power connections and fuses.
No output voltage	Faulty connections	Inspect output connections and wiring.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Fault indicator on	Internal fault	Reset the inverter and check for errors.

Reset: Use the reset function in the menu if available.

Service: Contact INVT support for further assistance.