INVT Inverter Goodrive GD300-19-075G-4 Manual

The INVT Goodrive GD300-19-075G-4 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, a user-friendly interface, and robust protection mechanisms. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Advanced control algorithms, user-friendly interface, multiple protection features, and compact design.

Feature	Description
Control Algorithms	Advanced algorithms for precise motor control
User Interface	Intuitive display for easy operation
Protection Features	Over-voltage, under-voltage, and over-current protection
Compact Design	Space-saving design for easy installation
Communication Protocols	Supports various communication protocols for integration

Installation

Unpack and inspect the inverter. Ensure a stable and ventilated installation surface.

Mount the inverter securely on a wall or panel.
Connect the input power supply according to the wiring diagram.
Connect the output to the motor or load.
Ensure all connections are tight and secure.

WARNING! Ensure proper grounding to avoid electrical hazards.

First-Time Setup

Power on the inverter and follow the setup wizard on the display.

Select the motor type and parameters.
Set the operating frequency and voltage.
Configure any additional settings as required.
Save the configuration and exit the setup menu.

CAUTION! Double-check all settings before operation.

Specifications

Model: GD300-19-075G-4
Input Voltage: 380V AC
Output Power: 75 kW
Control Method: V/F control, vector control
Operating Temperature: -10°C to 50°C
Protection Class: IP20

Controls and Settings

Access the settings via the user interface. Key controls include:

Display: Shows operational status and settings.

Buttons: Navigate through menus and adjust settings.

Common settings include motor parameters, frequency settings, and protection settings.

Connecting Devices

Ensure all devices are powered off before making connections.

Connect the motor to the inverter output terminals.
Connect the control panel if applicable.
Verify all connections match the wiring diagram.

Tip: Use appropriate cables to ensure reliable operation.

Operating the Inverter

To operate the inverter, follow these steps:

Power on the inverter.
Select the desired operating mode.
Start the motor using the control panel.
Monitor the display for any alerts or warnings.

WARNING! Do not operate without proper safety measures in place.

Maintenance

Regular maintenance is essential for optimal performance.

Check connections and tighten if necessary.
Clean the inverter casing to prevent dust buildup.
Inspect cooling fans for proper operation.

CAUTION! Always disconnect power before performing maintenance.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the certification documents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check power connections and fuses.
No output voltage	Incorrect settings	Verify output settings and parameters.
Overheating	Blocked ventilation	Ensure proper airflow around the inverter.
Fault code displayed	Internal error	Refer to the manual for fault code definitions.

Reset: Use the reset function in the menu if available.

Service: Contact support for further assistance.