INVT Inverter Goodrive GD300-19-090G-4 Manual

The INVT Goodrive GD300-19-090G-4 is a high-performance inverter designed for various applications, providing reliable power conversion and control. This manual covers essential information regarding safety, features, installation, setup, operation, and troubleshooting to ensure optimal performance of the inverter.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key features include: advanced control algorithms, multiple protection functions, user-friendly interface, and compatibility with various motor types.

Feature	Description
Advanced Control	Supports V/F control, vector control, and torque control.
Protection Functions	Over-voltage, under-voltage, over-current, and over-temperature protection.
User Interface	Easy-to-read LCD display for real-time monitoring and adjustments.
Communication	Supports Modbus RTU for integration with other devices.
Compact Design	Space-saving design suitable for various installation environments.

Installation

Ensure proper installation to maximize performance and safety.

Mount the inverter securely in a well-ventilated area.
Connect the input power supply according to the wiring diagram.
Ensure all connections are tight and secure.
Connect the output to the motor or load.

WARNING! Follow all safety guidelines to prevent electrical hazards.

First-Time Setup

Power on the inverter and configure the basic settings.

Set the motor parameters in the menu.
Adjust the control mode according to the application.
Test the inverter with a no-load condition before full operation.

CAUTION! Ensure all settings are correct to avoid damage to the motor.

Specifications

Model: GD300-19-090G-4
Input Voltage: 380V AC
Output Voltage: 0-380V AC
Power Rating: 90 kW
Control Method: V/F control, vector control
Operating Temperature: -10°C to 50°C
Protection Class: IP20

Controls and Settings

Access the settings through the user interface for adjustments.

Display: LCD screen shows operational status and settings.

Buttons: Navigation buttons for menu access and parameter adjustments.

Connecting Devices

Follow the wiring diagram for connecting external devices.

Ensure power is off before making connections.
Connect the control terminals as per the manual.
Verify all connections before powering on the inverter.

Tip: Double-check wiring to prevent short circuits.

Operating the Inverter

Learn how to operate the inverter effectively.

Power on the inverter using the main switch.
Select the desired operating mode from the menu.
Monitor the performance through the LCD display.
Adjust settings as necessary during operation.

WARNING! Do not exceed the rated capacity of the inverter.

Maintenance

Regular maintenance is essential for longevity.

Check connections and tighten if necessary.
Clean the inverter casing to prevent dust accumulation.
Inspect for any signs of wear or damage.

Regulatory Information

This inverter complies with international safety and performance standards.

For more information, refer to the regulatory compliance section in the manual.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check input power connections and fuses.
No output voltage	Faulty connections	Verify output connections and settings.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Error codes displayed	Internal fault	Refer to the error code section in the manual.

Reset: Follow the reset procedure in the manual if necessary.

Service: For assistance, contact INVT support.