INVT Inverter Goodrive GD300-19-110G-4 Manual

The INVT Goodrive GD300-19-110G-4 is a high-performance inverter designed for various applications, providing reliable power conversion and control. It features advanced control algorithms, multiple communication protocols, and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-efficiency inverter, user-friendly interface, multiple communication options, and robust protection features.

Feature	Description
High Efficiency	Optimized for energy savings and performance.
Multiple Communication Protocols	Supports Modbus, CANopen, and more for easy integration.
Built-in Protection	Over-voltage, under-voltage, over-current, and thermal protection.
User-Friendly Interface	Intuitive display for easy monitoring and configuration.
Compact Design	Space-saving design suitable for various installations.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below.

Mount the inverter securely in a well-ventilated area.
Connect the input power supply according to the wiring diagram.
Ensure all connections are tight and secure.
Connect the output to the load as specified in the manual.

WARNING! Ensure proper grounding and follow all safety precautions during installation.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the appropriate operating mode based on your application.
Set the output voltage and frequency as required.
Configure communication settings if applicable.
Save the settings and restart the inverter.

CAUTION! Double-check all settings before finalizing.

Specifications

Model: GD300-19-110G-4
Input Voltage: 380V AC
Output Voltage: 0-400V AC
Power Rating: 110 kW
Efficiency: Up to 98%
Operating Temperature: -10°C to 50°C
Protection Class: IP20

Controls and Settings

Access settings via the front panel display or remote communication interface.

Front Panel: Power, Status, Fault indicators, and Navigation buttons.

Settings include: Output frequency, voltage, communication parameters, and protection settings.

Connecting Devices

Ensure all devices are powered off before making connections.

Connect the input power supply to the inverter.
Connect the output to the load as per specifications.
Verify all connections are secure before powering on.

Tip: Use appropriate cables and connectors for safety and performance.

Operating the Inverter

Follow the operational guidelines for effective use.

Power on the inverter using the front panel button.
Monitor the status indicators for normal operation.
Adjust settings as necessary for optimal performance.
Regularly check for any fault indications and address them promptly.

WARNING! Do not operate the inverter outside of specified limits.

Maintenance

Regular maintenance is essential for longevity and performance.

Inspect connections and wiring periodically.
Clean the inverter casing and ensure ventilation is unobstructed.
Check for any signs of wear or damage.
Update firmware as necessary for optimal performance.

Regulatory Information

Complies with international safety and performance standards. For detailed compliance information, refer to the documentation provided with the inverter.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check input connections and power supply.
Fault indicator is lit	Overload or short circuit	Disconnect load and reset the inverter.
Output voltage is unstable	Incorrect settings	Verify output settings and adjust as necessary.
Communication failure	Wiring or protocol mismatch	Check communication connections and settings.

Reset: Follow the reset procedure in the manual if necessary.

Service: For support, contact INVT customer service.