INVT Inverter Goodrive GD300-19-132G-4 Manual

The INVT Goodrive GD300-19-132G-4 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, a user-friendly interface, and robust protection mechanisms. This manual provides essential information regarding safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating Instructions 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key features include: high efficiency, compact design, multiple communication protocols, and built-in safety features.

Feature	Description
High Efficiency	Reduces energy consumption and operational costs.
Compact Design	Space-saving design suitable for various installations.
Multiple Communication Protocols	Supports Modbus, CANopen, and other protocols for easy integration.
Built-in Safety Features	Over-voltage, under-voltage, and over-temperature protection.
User-Friendly Interface	Intuitive display and controls for easy operation.

Installation

Ensure the inverter is installed in a well-ventilated area. Follow the steps below for proper installation.

Mount the inverter securely on a stable surface.
Connect the input power supply according to the wiring diagram.
Connect the output to the motor or load.
Ensure all connections are tight and secure.

WARNING! Ensure power is off during installation to avoid electric shock.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the motor type and parameters in the setup menu.
Set the operational limits such as maximum speed and torque.
Save the configuration and exit the setup menu.

CAUTION! Double-check all settings before starting the inverter.

Specifications

Input Voltage: 380V AC.
Output Voltage: 0-380V AC.
Power Rating: 132 kW.
Control Method: V/F control, vector control.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.

Controls and Settings

The inverter features a digital display and keypad for easy navigation and control.

Key Controls: Power, Start/Stop, Speed Control, and Menu Navigation.

Settings can be adjusted via the menu for parameters such as acceleration, deceleration, and frequency.

Connecting Devices

Ensure all devices are powered off before making connections.

Connect the motor to the inverter output terminals.
Connect the control panel to the designated input terminals.
Verify all connections are correct before powering on.

Tip: Use shielded cables for signal connections to reduce interference.

Operating Instructions

To operate the inverter, follow these steps:

Power on the inverter using the main switch.
Select the desired operational mode using the keypad.
Start the motor by pressing the Start button.
Monitor the display for operational status and alarms.

WARNING! Do not operate the inverter without proper load connected.

Maintenance

Regular maintenance is essential for optimal performance.

Check connections and tighten if necessary.
Inspect for dust and clean the inverter casing.
Ensure ventilation is not obstructed.

CAUTION! Always disconnect power before performing maintenance.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed compliance information, refer to the product certification documents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	No input power	Check power supply and connections.
Overload alarm	Excessive load	Reduce load and reset the inverter.
Faulty display	Loose connections	Check and secure display connections.
Motor not running	Incorrect settings	Verify motor parameters in setup menu.

Reset: Use the reset function in the menu if available.

Service: For support, contact INVT customer service.