INVT Inverter Goodrive GD300-19-160G-4 Manual

The INVT Goodrive GD300-19-160G-4 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, robust protection mechanisms, and a user-friendly interface. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Advanced control algorithms, built-in protection features, user-friendly interface, multiple communication protocols.

Feature	Description
Advanced Control	Ensures precise motor control and efficiency.
Protection Mechanisms	Over-voltage, under-voltage, over-current, and thermal protection.
User Interface	Intuitive display for easy operation and monitoring.
Communication Protocols	Supports MODBUS, CANopen, and other protocols for integration.
Compact Design	Space-saving design for easy installation.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Mount the inverter securely on a stable surface.
Connect the power supply according to the wiring diagram.
Ensure all connections are tight and secure.
Connect the motor and other peripherals as needed.

WARNING! Ensure the inverter is powered off during installation to avoid electric shock.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the motor type and parameters.
Set the operational mode (e.g., V/F control, vector control).
Adjust protection settings as necessary.
Save the configuration and test the operation.

CAUTION! Double-check all settings before starting the motor.

Specifications

Input Voltage: 380V AC.
Output Voltage: 0-380V AC.
Power Rating: 160 kW.
Control Method: V/F control, vector control.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.

Controls and Settings

Access settings via the user interface. Key controls include:

Display: Shows operational status and settings.

Buttons: Navigate through menus and adjust parameters.

Indicators: LED indicators for power, fault, and operational status.

Connecting Devices

Follow these steps to connect devices:

Turn off the inverter and all connected devices.
Connect the motor and peripherals according to the wiring diagram.
Ensure all connections are secure before powering on.

Tip: Use appropriate cables and connectors for reliable operation.

Operating the Inverter

To operate the inverter:

Power on the inverter.
Select the desired operational mode.
Start the motor using the control panel.
Monitor performance through the display.

WARNING! Do not exceed the rated parameters during operation.

Maintenance

Regular maintenance is essential for optimal performance:

Check connections and tighten if necessary.
Inspect for dust and clean the inverter regularly.
Test the operational parameters periodically.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the regulatory documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check power connections and fuses.
Motor does not start	Incorrect settings	Verify motor parameters and operational mode.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Fault indicator on	Protection triggered	Check for faults and reset the inverter.

Reset: Refer to the user interface for reset options.

Service: Contact INVT support for assistance.