INVT Inverter Goodrive GD300-19-185G-4 Manual

The INVT Goodrive GD300-19-185G-4 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, robust protection mechanisms, and user-friendly interfaces. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key features include: advanced vector control, built-in PID control, multiple communication protocols, and customizable parameters for various applications.

Feature	Description
Advanced Vector Control	Provides precise speed and torque control.
Built-in PID Control	Allows for easy temperature and pressure control.
Multiple Communication Protocols	Supports Modbus, CANopen, and other protocols.
Customizable Parameters	Users can set parameters according to specific application needs.
Robust Protection Mechanisms	Overvoltage, undervoltage, and overcurrent protection.

Installation

Ensure proper installation to maximize performance and safety.

Mount the inverter securely in a well-ventilated area.
Connect the input power supply according to the wiring diagram.
Connect the output to the motor or load.
Ensure all connections are tight and secure.

WARNING! Ensure the inverter is powered off during installation to prevent electric shock.

First-Time Setup

Power on the inverter and follow the initial setup prompts.

Select the appropriate motor parameters in the setup menu.
Configure communication settings if applicable.
Test the inverter with a no-load condition before full operation.

CAUTION! Double-check all settings before starting the inverter.

Specifications

Model: GD300-19-185G-4.
Input Voltage: 380V AC.
Output Power: 185 kW.
Control Method: Vector control.
Protection Level: IP20.
Operating Temperature: -10°C to 50°C.

Controls and Settings

The inverter features a user-friendly interface with an LCD display for easy navigation.

Control Panel: Start/Stop, Parameter settings, Fault display, and Communication settings.

Connecting Devices

Ensure proper connections to avoid damage to the inverter and connected devices.

Turn off the inverter and all connected devices before making connections.
Follow the wiring diagram for correct connections.
Verify all connections before powering on the inverter.

Tip: Use shielded cables for communication to reduce interference.

Operating the Inverter

Follow these steps to operate the inverter safely and efficiently.

Power on the inverter and wait for the self-check to complete.
Select the desired operating mode from the control panel.
Start the motor and monitor the performance through the display.
Adjust parameters as necessary during operation.

WARNING! Do not exceed the rated parameters during operation.

Maintenance

Regular maintenance is essential for optimal performance and longevity.

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of wear or damage.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed information, refer to the certification documents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check power connections and fuses.
Error code displayed	Fault condition	Refer to the error code list in the manual.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Motor not running	Incorrect settings	Verify motor parameters and settings.

Reset: Use the reset function in the menu if available.

Service: Contact INVT support for assistance.