INVT Inverter Goodrive GD300-19-220G-4 Manual

The INVT Goodrive GD300-19-220G-4 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, a compact design, and robust protection mechanisms. This manual provides essential information regarding safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-performance control algorithms, compact design, multiple protection features, user-friendly interface.

Feature	Description
Advanced Control	Utilizes vector control for precise motor control
Compact Design	Space-saving design for easy installation
Protection Features	Over-voltage, under-voltage, over-current protection
User Interface	Intuitive display for easy operation
Communication	Supports various communication protocols

Installation

Carefully unpack the inverter and inspect for any damage. Ensure a stable mounting surface.

Mount the inverter securely on a wall or panel.
Connect the power supply according to the wiring diagram.
Ensure all connections are tight and secure.
Power on the inverter and check for proper operation.

WARNING! Ensure proper ventilation to avoid overheating. Follow all safety guidelines during installation.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the motor type in the setup menu.
Set the operating parameters according to the application.
Test the inverter with a small load to ensure proper configuration.

CAUTION! Double-check all settings before full operation.

Specifications

Input Voltage: 220V AC.
Output Voltage: 0-220V AC.
Power Rating: 1.5 kW.
Frequency Range: 0-400 Hz.
Protection Class: IP20.
Operating Temperature: -10°C to 50°C.

Controls and Settings

Access the settings via the user interface. Key controls include: Power, Start/Stop, Speed Control, and Parameter Settings.

Display: Shows operational status, error codes, and parameter settings.

Connecting Devices

Ensure all devices are powered off before connecting.

Connect the motor to the inverter output terminals.
Connect the control panel if applicable.
Verify all connections before powering on.

Tip: Use appropriate cables to ensure optimal performance.

Operating the Inverter

Follow the operational guidelines for efficient use.

Start the inverter using the power button.
Adjust speed settings as required for your application.
Monitor the display for any error messages.

WARNING! Do not exceed the rated capacity of the inverter.

Maintenance

Regular maintenance is essential for optimal performance.

Check connections periodically for wear and tear.
Clean the inverter casing to prevent dust accumulation.
Inspect cooling fans for proper operation.

Regulatory Information

This inverter complies with international safety standards and regulations. For more information, refer to the product certification documents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	No power supply	Check power connections and fuses.
Error code displayed	Faulty connection	Refer to the error code guide in the manual.
Motor not running	Incorrect settings	Verify motor parameters and settings.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.

Reset: Follow the reset procedure in the user interface if necessary.