INVT Inverter Goodrive GD300-19-2R2G-4 Manual

The INVT Goodrive GD300-19-2R2G-4 is a high-performance inverter designed for various applications, providing reliable control of AC motors. It features advanced control algorithms, a user-friendly interface, and robust protection mechanisms. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating Instructions 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-performance inverter, user-friendly interface, multiple control modes, built-in protection features.

Feature	Description
Advanced Control Algorithms	Ensures precise motor control and efficiency.
User-Friendly Interface	Easy navigation and configuration options.
Built-in Protection	Over-voltage, under-voltage, and over-current protection.
Multiple Control Modes	Supports V/f control, vector control, and more.
Compact Design	Space-saving design for easy installation.

Installation

Carefully unpack the inverter and inspect for any damage. Mount the inverter in a well-ventilated area.

Connect the power supply: Ensure the power is off before making connections.
Connect the motor: Use appropriate wiring for the motor connections.
Set the DIP switches: Configure settings according to the application requirements.
Power on the inverter: Ensure all connections are secure before powering on.

WARNING! Ensure proper grounding and follow all safety guidelines during installation.

First-Time Setup

Power on the inverter and follow the setup wizard on the display.

Select motor parameters: Input motor specifications for optimal performance.
Set control mode: Choose between V/f control or vector control based on application.
Adjust parameters: Fine-tune settings for acceleration, deceleration, and torque.
Save settings: Ensure all configurations are saved before exiting the setup.

CAUTION! Double-check all settings to ensure proper operation.

Specifications

Input Voltage: 380V AC.
Output Voltage: 0-380V AC.
Power Range: Up to 15 kW.
Control Method: V/f control, vector control.
Protection Level: IP20.
Operating Temperature: -10°C to 50°C.
Dimensions: Compact design for easy installation.

Controls and Settings

Access settings via the front panel display. Key controls include: POWER, UP/DOWN, ENTER, ESC.

Display: Shows operational status, error codes, and parameter settings.

Adjustable parameters include: frequency, acceleration, deceleration, and motor settings.

Connecting Devices

Ensure the inverter is powered off before making any connections.

Connect the motor to the inverter output terminals.
Connect the power supply to the inverter input terminals.
Ensure all connections are secure and insulated.
Power on the inverter and check for proper operation.

Tip: Use appropriate wire sizes for all connections to prevent overheating.

Operating Instructions

To operate the inverter, follow these steps:

Power on the inverter using the front panel switch.
Select the desired operating mode using the control panel.
Start the motor by pressing the START button.
Monitor the display for any error messages or alerts.
Adjust speed and torque as necessary using the control panel.

WARNING! Do not operate the inverter without proper load connected.

Accessibility Features

The inverter includes features for ease of use, including a clear display and intuitive controls for all users.

Care & Cleaning

Unplug the inverter before cleaning. Use a dry cloth to wipe the exterior; avoid liquids.

CAUTION! Do not use abrasive materials or solvents for cleaning.

Regulatory Information

This inverter complies with international safety and performance standards. For support, visit the official INVT website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check power connections and fuses.
Error code displayed	Overload or short circuit	Disconnect load and reset the inverter.
Motor not running	Incorrect wiring	Verify motor connections and settings.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Unstable output	Faulty connections	Check all connections for security and integrity.

Reset: Refer to the manual for reset procedures if necessary.

Service: Contact INVT support for further assistance.