INVT Inverter Goodrive GD300-19-315G-4 Manual

The INVT Goodrive GD300-19-315G-4 is a high-performance inverter designed for various applications, providing reliable control of AC motors. This manual covers essential information regarding safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

The Goodrive GD300 inverter features advanced control algorithms, multiple communication protocols, and a user-friendly interface.

Feature	Description
Advanced Control	Supports V/f control, vector control, and torque control.
Communication Protocols	Compatible with Modbus, CANopen, and other protocols.
Protection Features	Over-voltage, under-voltage, over-current, and thermal protection.
User Interface	LCD display for easy monitoring and configuration.
Compact Design	Space-saving design suitable for various installations.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Mount the inverter in a well-ventilated area.
Connect the input power supply to the designated terminals.
Connect the output to the motor or load.
Ensure all connections are secure and insulated.

WARNING! Ensure the inverter is powered off during installation to avoid electric shock.

First-Time Setup

Power on the inverter and follow the setup wizard on the LCD display.

Select the motor type and parameters.
Configure the control mode (V/f or vector).
Set the communication parameters if applicable.
Save the settings and exit the setup menu.

CAUTION! Double-check all settings before starting the inverter.

Specifications

Input Voltage: 380V AC ±15%.
Output Voltage: 0-380V AC.
Power Range: 0.75kW to 315kW.
Frequency Range: 0-400Hz.
Protection Class: IP20.
Operating Temperature: -10°C to 50°C.

Controls and Settings

The inverter can be controlled via the front panel or remotely using communication protocols.

Front Panel: Power button, LCD display, parameter adjustment keys.

Settings include motor parameters, control modes, and protection settings.

Connecting Devices

Ensure proper connections to avoid damage to the inverter or connected devices.

Turn off the inverter and all connected devices before making connections.
Use appropriate cables for power and communication connections.
Verify all connections before powering on the inverter.

Tip: Keep the installation area clean and free from debris.

Operating the Inverter

To operate the inverter, follow these steps:

Power on the inverter using the front panel button.
Select the desired operation mode.
Start the motor using the start command.
Monitor the operation via the LCD display.

WARNING! Do not operate the inverter without a load connected.

Maintenance

Regular maintenance is essential for the longevity of the inverter.

Check for dust accumulation and clean the inverter regularly.
Inspect connections for wear or damage.
Ensure proper ventilation around the inverter.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed regulatory information, refer to the product documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check input power connections and fuses.
No output voltage	Faulty connections	Verify output connections and load.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Error codes displayed	Fault condition	Refer to the manual for error code definitions.

Reset: Use the reset function in the menu if available.

Service: Contact INVT support for assistance.