INVT Inverter Goodrive GD35-004G-4-D1 Manual

The INVT Goodrive GD35-004G-4-D1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, high efficiency, and a compact design. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Compact design, advanced control algorithms, multiple communication interfaces, and high efficiency.

Feature	Description
Compact Design	Space-saving design for easy installation in various environments.
Advanced Control	Supports vector control for precise motor control.
Multiple Interfaces	Supports RS485, CAN, and other communication protocols.
High Efficiency	Optimized for energy savings and reduced operational costs.
Protection Features	Over-voltage, under-voltage, over-current, and thermal protection.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Unpack and inspect the inverter.
Mount the inverter on a stable surface.
Connect power supply and motor according to wiring diagrams.
Ensure all connections are secure and insulated.

WARNING! Ensure proper grounding to avoid electrical hazards.

First-Time Setup

Power on the inverter and follow the setup wizard on the display.

Select motor parameters: Input motor specifications for optimal performance.
Configure communication settings: Set up communication protocols as needed.
Test run: Perform a test run to ensure proper operation.

CAUTION! Ensure all safety precautions are followed during setup.

Specifications

Input Voltage: 380V AC.
Output Voltage: 0-380V AC.
Power Rating: 4kW.
Control Mode: V/F control, vector control.
Protection Level: IP20.
Operating Temperature: -10°C to 50°C.

Controls and Settings

Access settings via the control panel. Key controls include:

Control Panel: Start/Stop, Speed Control, Parameter Settings.

Remote Control: Optional remote for convenience.

Connecting Devices

Follow these steps to connect devices:

Ensure the inverter is powered off before making connections.
Connect the motor to the inverter output terminals.
Connect the power supply to the inverter input terminals.
Verify all connections before powering on.

Tip: Use appropriate cables and connectors for safety.

Operating the Inverter

To operate the inverter:

Power on the inverter using the control panel.
Select the desired operating mode.
Adjust speed settings as required.
Monitor performance via the display.

WARNING! Do not exceed the rated specifications during operation.

Maintenance

Regular maintenance is essential for optimal performance:

Check connections periodically for wear and tear.
Clean the inverter casing to prevent dust accumulation.
Inspect cooling fans for proper operation.

CAUTION! Always disconnect power before performing maintenance.

Regulatory Information

This inverter complies with international safety and performance standards. For support, visit the official INVT website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power supply issue	Check power connections and fuses.
Overheating	Insufficient ventilation	Ensure proper airflow around the inverter.
Erratic operation	Incorrect settings	Review and adjust settings as needed.
Motor not running	Connection issue	Verify motor connections and parameters.

Reset: Use the reset function in the menu if available.

Service: Contact INVT support for further assistance.