INVT Inverter Goodrive GD35-004G-4-H1 Manual

The INVT Goodrive GD35-004G-4-H1 is a high-performance inverter designed for various applications, including industrial automation and renewable energy systems. It features advanced control algorithms, high efficiency, and robust protection mechanisms. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-performance control algorithms, built-in protection features, user-friendly interface, and compatibility with various motor types.

Feature	Description
Advanced Control	Supports V/F control, vector control, and torque control.
Protection Features	Over-voltage, under-voltage, over-current, and over-temperature protection.
User Interface	Easy-to-read LCD display for monitoring and configuration.
Communication	Supports Modbus RTU for integration with other systems.
Compact Design	Space-saving design suitable for various installations.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Mount the inverter in a well-ventilated area.
Connect power supply and motor according to the wiring diagram.
Ensure all connections are secure and insulated.
Power on the inverter and check for any error codes.

WARNING! Ensure the inverter is properly grounded to avoid electrical hazards.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select motor type and parameters in the setup menu.
Set the desired operating frequency and voltage.
Configure communication settings if applicable.
Save settings and perform a test run.

CAUTION! Double-check all settings before starting the motor.

Specifications

Input Voltage: 380V AC.
Output Voltage: Adjustable up to 400V AC.
Power Rating: 4 kW.
Frequency Range: 0-400 Hz.
Control Method: V/F control, vector control.
Protection Class: IP20.
Operating Temperature: -10°C to 50°C.

Controls and Settings

Access the settings via the LCD display. Use the keypad for navigation and adjustments.

Key Controls: Power, Start/Stop, Frequency Up/Down, Parameter Settings.

Monitor: Real-time display of output frequency, current, and fault status.

Connecting Devices

Follow these guidelines for connecting devices:

Ensure power is off before making connections.
Connect the motor leads to the inverter output terminals.
Connect the power supply to the inverter input terminals.
Verify all connections before powering on the inverter.

Tip: Use appropriate cable sizes for power and control connections.

Operating the Inverter

To operate the inverter:

Press the power button to turn on the inverter.
Select the desired operating mode using the keypad.
Start the motor by pressing the start button.
Monitor the operation via the LCD display.

WARNING! Do not operate the inverter without a connected motor.

Maintenance

Regular maintenance is essential for optimal performance:

Check for dust accumulation and clean the inverter regularly.
Inspect connections for wear and tear.
Test the inverter functionality periodically.
Update firmware as needed.

Regulatory Information

Complies with international safety and performance standards. For detailed compliance information, refer to the product documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check power connections and fuses.
Overcurrent fault	Motor overload	Reduce load or check motor specifications.
Communication error	Wiring issue	Check communication wiring and settings.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.

Reset: Use the reset function in the menu if available.

Service: Contact INVT support for assistance.