INVT Inverter Goodrive GD35-004G-4-S1 Manual

The INVT Goodrive GD35-004G-4-S1 is a high-performance inverter designed for various applications, providing reliable control of AC motors. It features advanced control algorithms, a user-friendly interface, and robust protection mechanisms. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-performance inverter, user-friendly interface, advanced control algorithms, multiple protection features.

Feature	Description
Advanced Control	Supports V/f control, vector control, and torque control.
User Interface	LCD display for easy monitoring and configuration.
Protection Mechanisms	Over-voltage, under-voltage, over-current, and over-temperature protection.
Communication Options	Supports RS485 and CAN communication protocols.
Compact Design	Space-saving design for easy installation.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Mount the inverter on a stable surface, ensuring adequate ventilation.
Connect the input power supply according to the wiring diagram.
Connect the output to the motor ensuring correct phase alignment.
Power on the inverter and check for proper operation.

WARNING! Ensure all connections are secure to prevent electrical hazards.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the motor type and parameters in the setup menu.
Set the desired operating frequency and acceleration/deceleration times.
Save the settings and perform a test run.

CAUTION! Ensure all settings are correct before operating the motor.

Specifications

Input Voltage: 3-phase 380V-480V AC.
Output Voltage: 3-phase AC voltage matching input.
Power Rating: 4 kW.
Control Method: V/f control, vector control.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.

Controls and Settings

Access settings via the LCD display. Key controls include:

Buttons: Start, Stop, Forward, Reverse, and Parameter settings.

Settings include motor parameters, control mode, and communication settings.

Connecting Devices

Follow these steps to connect devices:

Ensure the inverter is powered off before making connections.
Connect the motor to the output terminals.
Connect the control panel if applicable.
Power on the inverter and check connections.

Tip: Always refer to the wiring diagram for correct connections.

Operating the Inverter

To operate the inverter:

Press the Start button to initiate operation.
Monitor the LCD display for operational status.
Adjust speed and torque settings as needed.
Press Stop to halt operation safely.

WARNING! Always monitor the inverter during operation to prevent damage.

Maintenance

Regular maintenance is essential for optimal performance:

Inspect connections and wiring regularly.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of overheating or damage.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the product documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check input power connections and fuses.
No output to motor	Incorrect wiring	Verify motor connections and settings.
Overheating	Insufficient ventilation	Ensure proper airflow around the inverter.
Error codes displayed	Fault condition	Refer to the manual for error code definitions.

Reset: Use the reset function in the menu if available.

Service: Contact support for further assistance.