INVT Inverter Goodrive GD35-011G-4-D1 Manual

The INVT Goodrive GD35-011G-4-D1 is a high-performance inverter designed for various industrial applications. It offers advanced control features, high efficiency, and robust protection mechanisms. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-performance control algorithms, built-in protection features, user-friendly interface, and compact design.

Feature	Description
Advanced Control	Supports V/F control, vector control, and torque control.
Protection Features	Over-voltage, under-voltage, over-current, and over-temperature protection.
User Interface	Easy-to-use keypad and display for monitoring and adjustments.
Compact Design	Space-saving design suitable for various installations.
Communication	Supports Modbus RTU for integration with other systems.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below.

Mount the inverter securely on a stable surface.
Connect the power supply according to the wiring diagram.
Ensure proper grounding to prevent electrical hazards.
Connect the output to the motor or load.

WARNING! Ensure all connections are secure and follow electrical safety standards.

First-Time Setup

Power on the inverter and follow the on-screen prompts for initial configuration.

Select the motor type and parameters in the setup menu.
Set the operational parameters such as frequency and voltage.
Test the inverter with a no-load condition before connecting to the motor.

CAUTION! Ensure all settings are correct to avoid damage to the inverter or connected equipment.

Specifications

Input Voltage: 3-phase 380V-480V.
Output Voltage: 3-phase output with adjustable frequency.
Power Range: Up to 11 kW.
Control Method: V/F control, vector control.
Protection Class: IP20.
Operating Temperature: -10°C to 50°C.

Controls and Settings

Access the settings via the keypad. Key functions include:

Keypad: Start, Stop, Forward, Reverse, and Parameter settings.

Adjust operational parameters such as frequency, acceleration, and deceleration times.

Connecting Devices

Ensure proper connections to the motor and power supply.

Turn off power before making connections.
Use appropriate cables for power and control connections.
Verify connections against the wiring diagram provided in the manual.

Tip: Double-check all connections to avoid short circuits.

Operating the Inverter

Follow these steps to operate the inverter:

Press the Start button to initiate operation.
Monitor the display for operational status and parameters.
Use the Stop button to halt operation safely.

WARNING! Do not operate the inverter without proper load connected.

Maintenance

Regular maintenance is essential for optimal performance.

Check connections periodically for signs of wear or corrosion.
Clean the inverter casing to prevent dust accumulation.
Inspect cooling fans and ensure they are functioning properly.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the regulatory documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check power connections and supply voltage.
No output voltage	Faulty connections	Verify output connections to the motor.
Overheating	Insufficient ventilation	Ensure proper airflow around the inverter.
Error codes displayed	Fault conditions	Refer to the manual for specific error codes and solutions.

Reset: Use the reset function in the menu if available.

Service: Contact INVT support for further assistance.