INVT Inverter Goodrive GD35-011G-4-H1 Manual

The INVT Goodrive GD35-011G-4-H1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, a user-friendly interface, and robust protection mechanisms. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

The Goodrive GD35-011G-4-H1 inverter offers a range of features including vector control, multiple communication protocols, and customizable parameters for various applications.

Feature	Description
Vector Control	Provides precise speed and torque control.
Multiple Protocols	Supports Modbus, CANopen, and other communication protocols.
Built-in Protection	Over-voltage, under-voltage, over-current, and thermal protection.
User-Friendly Interface	Intuitive keypad for easy operation and configuration.
Compact Design	Space-saving design suitable for various installations.

Installation

Ensure proper installation to maximize performance and safety. Follow the guidelines below:

Mount the inverter securely in a well-ventilated area.
Connect input power supply according to specifications.
Wire the output to the motor or load.
Ensure all connections are tight and secure.

WARNING! Always disconnect power before installation to avoid electric shock.

First-Time Setup

After installation, perform the following steps for initial setup:

Power on the inverter and access the setup menu.
Configure motor parameters such as voltage, current, and frequency.
Set communication parameters if applicable.
Save settings and perform a test run.

CAUTION! Ensure all settings are correct before operating the inverter.

Specifications

Model: GD35-011G-4-H1
Input Voltage: 220V AC
Output Voltage: 0-220V AC
Power Rating: 1.1 kW
Control Method: Vector control
Protection Class: IP20
Operating Temperature: -10°C to 50°C

Controls and Settings

The inverter features a keypad for easy control and settings adjustment. Key functions include:

Power On/Off
Speed Control
Parameter Setting
Fault Reset

Connecting Devices

Follow these steps to connect devices to the inverter:

Ensure the inverter is powered off before making connections.
Connect the motor to the output terminals.
Connect the control panel if applicable.
Power on the inverter and check for proper operation.

Tip: Always refer to the wiring diagram for correct connections.

Operating the Inverter

To operate the inverter, follow these steps:

Power on the inverter using the keypad.
Select the desired operating mode.
Adjust the speed as needed.
Monitor the display for any fault indications.

WARNING! Do not operate the inverter beyond its rated specifications.

Maintenance

Regular maintenance is essential for optimal performance:

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of wear or damage.

Regulatory Information

This inverter complies with relevant safety and performance standards. For more information, refer to the regulatory documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check input power connections.
Overcurrent fault	Motor overload	Reduce load or check motor specifications.
Fault code displayed	Internal error	Refer to the fault code list in the manual.
Inconsistent speed	Parameter settings	Verify motor parameters and settings.

Reset: Use the reset function in the menu if available.

Support: For assistance, contact INVT support or visit the official website.