INVT Inverter Goodrive GD35-011G-4-H2 Manual

The INVT Goodrive GD35-011G-4-H2 is a high-performance inverter designed for various applications, providing reliable control of AC motors. It features advanced control algorithms, multiple communication protocols, and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-performance inverter, user-friendly interface, multiple communication protocols, advanced control algorithms.

Feature	Description
Advanced Control Algorithms	Ensures precise motor control and efficiency.
User-Friendly Interface	Easy to navigate and configure settings.
Multiple Communication Protocols	Supports various industrial communication standards.
Compact Design	Space-saving design for easy installation.
Overload Protection	Protects the inverter and connected devices from damage.
Energy Saving	Optimizes energy consumption for cost efficiency.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Unpack and inspect the inverter for any damage.
Mount the inverter on a stable surface, ensuring proper ventilation.
Connect power supply according to the wiring diagram.
Connect the motor to the inverter output terminals.

WARNING! Ensure all connections are secure to prevent electrical hazards.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the motor type and parameters in the setup menu.
Set the desired operating frequency and voltage.
Configure communication settings if applicable.
Save the settings and perform a test run.

CAUTION! Ensure all settings are correct before operating the motor.

Specifications

Input Voltage: 380V AC.
Output Voltage: 0-380V AC.
Power Rating: 1.1 kW.
Frequency Range: 0-400 Hz.
Control Mode: V/F control, vector control.
Protection Level: IP20.
Operating Temperature: -10°C to 50°C.

Controls and Settings

Access the settings via the user interface. Key controls include:

Display: Shows operating status and parameters.

Buttons: Navigate through menus and adjust settings.

Settings include motor parameters, communication settings, and operational modes.

Connecting Devices

Ensure proper connections to the motor and power supply:

Turn off the inverter and devices before connecting.
Match cables to the appropriate terminals.
Double-check all connections for security.

Tip: Use appropriate gauge wiring for the power supply.

Operating the Inverter

Follow these steps to operate the inverter:

Power on the inverter.
Select the desired operating mode.
Start the motor using the control panel.
Monitor performance and adjust settings as needed.

WARNING! Do not exceed the rated specifications during operation.

Accessibility Features

The inverter includes features for ease of use, such as:

Clear display for easy reading.
Simple navigation for settings adjustment.

Care & Cleaning

Unplug the inverter before cleaning. Use a dry cloth to wipe the exterior.

CAUTION! Avoid using liquids or aerosols near the inverter.

Regulatory Information

This inverter complies with international safety and performance standards. For support, visit the official INVT website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check power connections and fuses.
Motor does not run	Incorrect settings	Verify motor parameters and settings.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Faulty display	Internal error	Reset the inverter to factory settings.

Service: For further assistance, contact INVT customer support.