INVT Inverter Goodrive GD35-011G-4-S1 Manual

The INVT Goodrive GD35-011G-4-S1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, a user-friendly interface, and robust protection mechanisms. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-performance control, user-friendly interface, multiple protection features, compact design.

Feature	Description
Advanced Control Algorithms	Ensures precise motor control and efficiency.
User-Friendly Interface	Easy-to-navigate menu for quick adjustments.
Multiple Protection Features	Over-voltage, under-voltage, over-current protections.
Compact Design	Space-saving design for easy installation.
Wide Input Voltage Range	Compatible with various power supply conditions.

Installation

Unpack and inspect the inverter. Ensure proper ventilation during installation.

Mount the inverter securely on a stable surface.
Connect the input power supply according to the wiring diagram.
Ensure all connections are tight and secure.
Power on the inverter and check for proper operation.

WARNING! Ensure the inverter is installed in a dry and cool environment to prevent overheating.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the motor type in the setup menu.
Set the desired operating parameters, including frequency and voltage.
Save the settings and exit the setup menu.

CAUTION! Double-check all settings before operation to ensure optimal performance.

Specifications

Model: GD35-011G-4-S1
Input Voltage: 220V AC
Output Power: 1.1 kW
Frequency Range: 0-400 Hz
Protection Class: IP20
Operating Temperature: -10°C to 50°C

Controls and Settings

Access settings via the front panel display. Key controls include POWER, UP/DOWN, and ENTER buttons.

Display: Shows operating status, error codes, and parameter settings.

Adjust parameters using the UP/DOWN buttons and confirm with the ENTER button.

Connecting Devices

Ensure all devices are powered off before making connections.

Connect the motor leads to the inverter output terminals.
Connect the control signals as per the wiring diagram.
Power on the inverter and the connected devices.

Tip: Always refer to the wiring diagram for correct connections.

Operating the Inverter

Follow the operational guidelines for optimal performance.

Start the inverter using the POWER button.
Monitor the display for any error messages during operation.
Adjust speed and torque settings as needed.

WARNING! Do not exceed the rated specifications to avoid damage.

Maintenance

Regular maintenance is essential for longevity.

Check connections periodically for wear and tear.
Clean the inverter casing to prevent dust accumulation.
Inspect cooling fans for proper operation.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, visit the official INVT website.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check power connections and fuses.
Error code displayed	Overload or short circuit	Disconnect load and reset the inverter.
Motor does not run	Incorrect settings	Verify motor parameters in the setup menu.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.

Reset: Refer to the user manual for reset procedures.

Service: For support, contact INVT customer service.