INVT Inverter Goodrive GD35-015G-4-C1 Manual

The INVT Goodrive GD35-015G-4-C1 is a high-performance inverter designed for various applications, providing efficient control of AC motors. It features advanced control algorithms, a user-friendly interface, and robust protection mechanisms. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Compact design, advanced control algorithms, built-in protection features, user-friendly interface, and multiple communication options.

Feature	Description
Compact Design	Space-saving design suitable for various installations
Advanced Control	Supports V/F control, vector control, and torque control
Built-in Protection	Overvoltage, undervoltage, overcurrent, and overheating protection
User Interface	Easy-to-read display with intuitive navigation
Communication Options	Supports RS485, Modbus, and CANopen protocols

Installation

Unpack and inspect the inverter. Mount it securely in a well-ventilated area.

Connect power supply: Ensure correct voltage and phase connections.
Connect motor: Use appropriate cables for motor connections.
Ground the inverter: Ensure proper grounding for safety.
Power on the inverter: Check for proper operation before use.

WARNING! Ensure all connections are secure to avoid electrical hazards.

First-Time Setup

Power on the inverter; follow the setup wizard on the display.

Select motor parameters: Input motor specifications for optimal performance.
Set control mode: Choose between V/F, vector, or torque control.
Adjust parameters: Fine-tune settings for acceleration, deceleration, and maximum frequency.
Save settings: Confirm and save the configuration before operation.

CAUTION! Ensure all settings are correct to prevent motor damage.

Specifications

Model: GD35-015G-4-C1
Input Voltage: 380V AC
Output Power: 1.5 kW
Control Mode: V/F, Vector Control
Protection Level: IP20
Operating Temperature: -10°C to 50°C
Dimensions: 250mm x 150mm x 120mm

Controls and Settings

Access settings via the user interface. Key controls include: Power, Start/Stop, Speed Control, and Parameter Settings.

Display: Shows operational status, error codes, and parameter settings.

Adjustable parameters include: Acceleration time, Deceleration time, Maximum frequency, and Motor parameters.

Connecting Devices

Connect the inverter to the motor and power supply as per the wiring diagram.

Turn off power before making connections.
Ensure correct polarity and phase connections.
Use appropriate gauge wire for connections.

Tip: Double-check all connections before powering on the inverter.

Operating the Inverter

To operate the inverter, follow these steps:

Power on the inverter: Ensure all connections are secure.
Set desired speed: Use the speed control feature.
Start the motor: Press the Start button to initiate operation.
Monitor performance: Check the display for operational status and any error codes.

WARNING! Do not exceed the rated specifications to avoid damage.

Accessibility Features

The inverter includes features for easy access and operation, including a clear display and intuitive controls.

Care & Cleaning

Unplug the inverter before cleaning. Use a dry cloth to wipe the exterior; avoid using liquids or aerosols.

CAUTION! Do not expose the inverter to moisture or extreme temperatures.

Regulatory Information

This inverter complies with international safety and performance standards. For support, visit the official INVT website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check power connections and fuses.
No output to motor	Incorrect wiring	Verify motor connections and settings.
Error code displayed	Fault condition	Refer to the manual for error code definitions.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.

Reset: Follow the reset procedure in the manual if necessary.

Service: For technical support, contact INVT customer service.