INVT Inverter Goodrive GD35-015G-4-H2 Manual

The INVT Goodrive GD35-015G-4-H2 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, a compact design, and robust protection mechanisms. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-performance control algorithms, compact design, robust protection features, user-friendly interface, and multiple communication options.

Feature	Description
Advanced Control	Supports vector control and V/f control for various applications.
Compact Design	Space-saving design suitable for various installation environments.
Protection Mechanisms	Over-voltage, under-voltage, over-current, and thermal protection.
User Interface	Easy-to-use keypad and display for configuration and monitoring.
Communication Options	Supports RS485, CAN, and Ethernet for integration with other systems.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below:

Mount the inverter in a well-ventilated area.
Connect the input power supply to the designated terminals.
Connect the output terminals to the motor or load.
Ensure all connections are secure and insulated.

WARNING! Ensure the inverter is powered off during installation to avoid electrical shock.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the motor type and parameters in the setup menu.
Set the desired operating frequency and voltage.
Configure any additional settings as required for your application.

CAUTION! Double-check all settings before starting the inverter to prevent damage.

Specifications

Model: GD35-015G-4-H2
Input Voltage: 220V AC
Output Power: 1.5 kW
Control Method: Vector control / V/f control
Operating Temperature: -10°C to 50°C
Protection Class: IP20

Controls and Settings

Access the inverter settings via the keypad. Key controls include:

Keypad: Start, Stop, Forward, Reverse, and Menu navigation.

Settings: Adjust parameters for motor control, protection settings, and communication options.

Connecting Devices

Ensure proper connections for the inverter to function correctly.

Turn off power before making any connections.
Connect the motor to the output terminals.
Connect the control signals as per the wiring diagram.

Tip: Use appropriate gauge wires for connections to prevent overheating.

Operating the Inverter

To operate the inverter, follow these steps:

Power on the inverter using the start button.
Select the desired operating mode (e.g., forward or reverse).
Monitor the display for any error messages or warnings.

WARNING! Do not operate the inverter outside of specified parameters to avoid damage.

Maintenance

Regular maintenance is essential for optimal performance:

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of wear or damage.

Regulatory Information

This inverter complies with international safety and performance standards. For further information, refer to the certification documents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	No power supply	Check power connections and supply.
Error code displayed	Fault condition	Refer to the error code section in the manual.
Overheating	Insufficient ventilation	Ensure proper airflow around the inverter.
Motor not running	Incorrect wiring	Verify wiring connections and motor parameters.

Reset: Use the reset function in the menu if available.

Service: Contact INVT support for assistance.