INVT Inverter Goodrive GD35-015G-4-S1 Manual

The INVT Goodrive GD35-015G-4-S1 is a high-performance inverter designed for various applications, providing reliable control of AC motors. It features advanced control algorithms, a user-friendly interface, and robust protection mechanisms. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Advanced control algorithms, user-friendly interface, multiple protection features, compact design, and high efficiency.

Feature	Description
Advanced Control	Supports V/F control, vector control, and torque control.
User Interface	LCD display for easy monitoring and configuration.
Protection Features	Over-voltage, under-voltage, over-current, and over-temperature protection.
Compact Design	Space-saving design suitable for various installations.
High Efficiency	Optimized for energy savings and reduced operational costs.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below:

Mount the inverter in a well-ventilated area.
Connect the input power supply to the designated terminals.
Connect the output terminals to the motor.
Ensure all connections are secure and insulated.

WARNING! Ensure power is off before making any connections to avoid electric shock.

First-Time Setup

Power on the inverter and follow the setup instructions on the display.

Select the appropriate motor parameters using the menu.
Set the desired operating frequency and voltage.
Configure protection settings as per application requirements.
Save the settings and perform a test run.

CAUTION! Double-check all settings before starting the inverter to prevent damage.

Specifications

Model: GD35-015G-4-S1.
Input Voltage: 220V AC.
Output Power: 1.5 kW.
Frequency Range: 0-400 Hz.
Control Mode: V/F, vector control.
Protection Class: IP20.
Operating Temperature: -10°C to 50°C.

Controls and Settings

Access settings via the LCD display. Key controls include:

Buttons: Start, Stop, Up, Down, Enter.

Settings include motor parameters, frequency settings, and protection configurations.

Connecting Devices

Ensure proper connections to avoid damage to the inverter or connected devices.

Turn off the inverter before making any connections.
Connect the motor to the output terminals.
Connect the power supply to the input terminals.
Check all connections for tightness and insulation.

Tip: Use appropriate gauge wiring for connections to ensure safety and performance.

Operating the Inverter

Follow these steps to operate the inverter:

Power on the inverter using the Start button.
Monitor the display for operational status.
Adjust frequency and speed as needed using the control buttons.
Stop the inverter using the Stop button when not in use.

WARNING! Do not exceed the rated specifications during operation.

Maintenance

Regular maintenance is essential for optimal performance:

Check connections periodically for wear and tear.
Clean the inverter casing to prevent dust accumulation.
Inspect cooling fans for proper operation.
Test the inverter functionality regularly.

Regulatory Information

This inverter complies with international safety standards. For detailed information, refer to the product documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	No power supply	Check power connections and ensure power is on.
Error code displayed	Fault condition	Refer to the manual for error code definitions and solutions.
Motor not running	Incorrect settings	Verify motor parameters and settings.
Overheating	Insufficient ventilation	Ensure proper airflow around the inverter.

Reset: Follow the reset procedure in the manual if necessary.

Service: Contact INVT support for further assistance.