INVT Inverter Goodrive GD35-018G-4-C1 Manual

The INVT Goodrive GD35-018G-4-C1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, a user-friendly interface, and robust protection mechanisms. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-efficiency inverter, user-friendly display, multiple communication protocols, and comprehensive protection features.

Feature	Description
High Efficiency	Optimized for energy savings and performance
User Interface	Intuitive display for easy operation
Communication Protocols	Supports Modbus, CANopen, and others
Protection Features	Over-voltage, under-voltage, and over-temperature protection
Compact Design	Space-saving design for easy installation

Installation

Ensure proper installation for optimal performance. Follow these steps:

Unpack and inspect the inverter.
Mount the inverter on a stable surface.
Connect power supply and load according to specifications.
Ensure all connections are secure before powering on.

WARNING! Ensure proper ventilation and avoid exposure to moisture.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the appropriate operating mode.
Set parameters for voltage and frequency.
Adjust motor settings as required.
Save settings and exit the setup menu.

CAUTION! Ensure all settings are correct before operation.

Specifications

Input Voltage: 380V AC.
Output Power: 18.5 kW.
Control Method: V/F control, vector control.
Protection Level: IP20.
Operating Temperature: -10°C to 50°C.
Weight: 12 kg.

Controls and Settings

Access settings via the user interface. Key controls include:

Display: Shows operational status and settings.

Buttons: Navigate menus and adjust settings.

Common settings include frequency, voltage, and motor parameters.

Connecting Devices

Follow these steps to connect devices:

Turn off the inverter and all connected devices.
Connect the motor and power supply to the appropriate terminals.
Ensure all connections are secure before powering on.
Select the correct input source on the inverter.

Tip: Double-check all connections to prevent damage.

Operating the Inverter

To operate the inverter:

Power on the inverter.
Select the desired operating mode.
Start the motor using the control panel.
Monitor performance through the display.

WARNING! Do not exceed the rated specifications during operation.

Maintenance

Regular maintenance is essential for optimal performance:

Check connections and tighten if necessary.
Clean the inverter casing to prevent dust buildup.
Inspect cooling fans for proper operation.
Schedule professional servicing as needed.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed regulatory information, refer to the documentation provided.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power supply issue	Check power connections and circuit breaker.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Faulty operation	Incorrect settings	Review and adjust settings as per manual.
Motor not running	Connection issue	Check motor connections and settings.

Reset: Use the reset function in the menu if available.

Service: Contact support for further assistance.