INVT Inverter Goodrive GD35-018G-4-D1 Manual

The INVT Goodrive GD35-018G-4-D1 is a high-performance inverter designed for various applications, providing reliable control of AC motors. It features advanced control algorithms, multiple communication protocols, and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-performance control algorithms, multiple communication interfaces, user-friendly display, and robust protection features.

Feature	Description
Advanced Control Algorithms	Ensures precise motor control and efficiency.
Multiple Communication Protocols	Supports MODBUS, CANopen, and more for integration.
User-Friendly Interface	Easy-to-navigate display for configuration and monitoring.
Robust Protection Features	Over-voltage, under-voltage, and over-temperature protections.
Compact Design	Space-saving design suitable for various installations.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Mount the inverter securely in a well-ventilated area.
Connect the power supply according to the wiring diagram.
Ensure all connections are tight and secure.
Connect the motor to the inverter output terminals.

WARNING! Ensure the inverter is powered off during installation to avoid electric shock.

First-Time Setup

Power on the inverter and follow the setup wizard on the display.

Select the motor type and parameters.
Set the operational mode (e.g., V/F control, vector control).
Configure communication settings if necessary.
Save the settings and perform a test run.

CAUTION! Ensure all settings are correct before starting the motor.

Specifications

Input Voltage: 3-phase 380V-480V AC.
Output Voltage: 3-phase 0-480V AC.
Power Rating: 1.5 kW.
Control Method: V/F control, vector control.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.

Controls and Settings

Access the settings via the user interface. Key controls include:

Display: Shows operational status and parameters.

Buttons: Navigate through menus and settings.

Adjust parameters such as frequency, acceleration, and deceleration times.

Connecting Devices

Follow these steps to connect external devices:

Ensure the inverter is powered off before making connections.
Connect the motor to the inverter output terminals.
Connect any external control devices as per the wiring diagram.
Power on the inverter and check connections.

Tip: Double-check all connections to avoid damage.

Operating the Inverter

To operate the inverter:

Power on the inverter using the main switch.
Select the desired operational mode.
Start the motor using the control interface.
Monitor the performance via the display.

WARNING! Do not exceed the rated parameters during operation.

Maintenance

Regular maintenance is essential for longevity:

Inspect connections and wiring regularly.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of overheating or damage.
Perform software updates as needed.

CAUTION! Disconnect power before performing maintenance.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the product documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check power connections and fuses.
Motor does not run	Incorrect settings	Verify motor parameters and settings.
Overheating	Insufficient ventilation	Ensure proper airflow around the inverter.
Communication failure	Cable issues	Check communication cables and connections.

Reset: Refer to the user manual for reset procedures.

Service: Contact INVT support for assistance.