INVT Inverter Goodrive GD35-018G-4-H1 Manual

The INVT Goodrive GD35-018G-4-H1 is a high-performance inverter designed for various applications, including industrial automation, HVAC systems, and renewable energy. This inverter features advanced control algorithms, a user-friendly interface, and robust protection mechanisms. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-efficiency inverter, user-friendly display, multiple communication protocols, and comprehensive protection features.

Feature	Description
High Efficiency	Optimized for energy savings and performance.
User Interface	Intuitive display for easy operation and monitoring.
Communication Protocols	Supports Modbus, CANopen, and other protocols.
Protection Features	Over-voltage, under-voltage, and over-temperature protection.
Compact Design	Space-saving design for easy installation.

Installation

Carefully unpack the inverter and inspect for any damage. Ensure the installation site is clean and dry.

Mount the inverter securely on a stable surface.
Connect the input power supply according to the wiring diagram.
Connect the output to the motor or load.
Ensure all connections are tight and secure.

WARNING! Ensure proper ventilation and avoid exposure to moisture.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the motor type and parameters.
Set the operational modes: V/F control or vector control.
Adjust the frequency and voltage settings as required.
Save the configuration and exit the setup menu.

CAUTION! Ensure all settings are correct before operating the inverter.

Specifications

Input Voltage: 380V AC ± 15%.
Output Voltage: 0-380V AC.
Power Rating: 18.5 kW.
Frequency Range: 0-400 Hz.
Control Method: V/F control, vector control.
Protection Level: IP20.
Operating Temperature: -10°C to 50°C.

Controls and Settings

Access settings via the user-friendly display. Key controls include START, STOP, and frequency adjustment.

Remote Control: Optional remote for enhanced operation.

Settings include motor parameters, operational modes, and protection settings.

Connecting Devices

Ensure all devices are powered off before making connections.

Connect the motor to the inverter output terminals.
Connect the control panel if applicable.
Verify all connections are correct and secure.

Tip: Use appropriate cables to avoid interference.

Operating the Inverter

To operate the inverter, ensure all settings are configured correctly.

Press the START button to initiate operation.
Monitor the display for operational status and parameters.
Adjust frequency as needed using the control panel.
Press STOP to halt operation safely.

WARNING! Do not exceed the rated parameters during operation.

Maintenance

Regular maintenance is essential for optimal performance.

Check connections and tighten if necessary.
Clean the inverter casing to prevent dust accumulation.
Inspect cooling fans for proper operation.
Schedule periodic professional inspections.

Regulatory Information

This inverter complies with international safety standards and regulations. For detailed compliance information, refer to the product documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check power connections and supply voltage.
No output voltage	Faulty connections	Inspect output connections and wiring.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Error codes displayed	System fault	Refer to the manual for specific error code meanings.

Reset: Use the reset function in the menu if available.

Service: Contact support for further assistance.