INVT Inverter Goodrive GD35-018G-4-H2 Manual

The INVT Goodrive GD35-018G-4-H2 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, high efficiency, and robust protection mechanisms. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key features include: high efficiency, compact design, built-in protection features, and user-friendly interface.

Feature	Description
High Efficiency	Optimized for energy savings and reduced operational costs.
Compact Design	Space-saving design suitable for various installations.
Built-in Protection	Over-voltage, under-voltage, and over-temperature protection mechanisms.
User-Friendly Interface	Intuitive controls and display for easy operation.

Installation

Carefully unpack the inverter and inspect for any damage. Install in a well-ventilated area.

Mount the inverter securely on a flat surface.
Connect the input power supply according to the wiring diagram.
Ensure all connections are tight and secure.
Power on the inverter and check for proper operation.

WARNING! Ensure proper grounding to avoid electrical hazards.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the appropriate operating mode.
Set the output frequency and voltage as required.
Adjust parameters for specific applications.
Save the settings and exit the setup menu.

CAUTION! Double-check all settings before operation.

Specifications

Model: GD35-018G-4-H2
Input Voltage: 380V AC
Output Power: 18.5 kW
Operating Temperature: -10°C to 50°C
Protection Class: IP20
Weight: 10 kg

Controls and Settings

The inverter features a digital display and keypad for easy navigation and control.

Key Controls: Power, Mode Selection, Parameter Adjustment, and Start/Stop.

Access advanced settings through the menu for fine-tuning performance.

Connecting Devices

Connect the inverter to the motor and other devices as per the wiring diagram.

Ensure all devices are powered off before making connections.
Use appropriate cables for input and output connections.
Verify all connections before powering on the inverter.

Tip: Regularly check connections for wear and tear.

Operating the Inverter

Follow the operational guidelines for optimal performance.

Start the inverter using the control panel.
Monitor the display for operational status.
Adjust settings as necessary during operation.
Stop the inverter safely when not in use.

WARNING! Do not operate the inverter outside specified parameters.

Maintenance

Regular maintenance is essential for longevity and performance.

Inspect connections and wiring periodically.
Clean the inverter casing and vents to prevent overheating.
Check for firmware updates and apply as necessary.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed regulatory information, refer to the documentation provided.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power supply issue	Check input connections and power source.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Faulty output	Incorrect settings	Verify and adjust output parameters.
Display error	Internal fault	Reset the inverter and check for faults.

Reset: Use the reset function in the menu if available.

Support: For assistance, contact INVT support or visit the official website.