INVT Inverter Goodrive GD35-022G-4-C1 Manual

The INVT Goodrive GD35-022G-4-C1 is a high-performance inverter designed for various applications, providing reliable control of AC motors. It features advanced control algorithms, a user-friendly interface, and robust protection mechanisms. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Advanced control algorithms, user-friendly interface, multiple protection features, and compact design.

Feature	Description
Advanced Control	Supports V/F control, vector control, and torque control.
User Interface	Easy-to-use keypad with LCD display for monitoring and adjustments.
Protection Features	Overvoltage, undervoltage, overcurrent, and thermal protection.
Compact Design	Space-saving design suitable for various installation environments.
Communication Options	Supports RS485 and CAN communication protocols.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Mount the inverter in a well-ventilated area.
Connect the input power supply according to the wiring diagram.
Connect the output to the motor.
Ensure all connections are secure and insulated.

WARNING! Ensure the inverter is powered off during installation to avoid electric shock.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the motor type and parameters.
Set the operating frequency and voltage.
Configure protection settings as needed.
Save the settings and perform a test run.

CAUTION! Ensure all settings are correct before operating the motor.

Specifications

Input Voltage: 220V AC.
Output Voltage: 0-220V AC.
Power Rating: 2.2 kW.
Operating Temperature: -10°C to 50°C.
Control Method: V/F control, vector control.
Protection Class: IP20.

Controls and Settings

Access settings via the keypad. Key functions include:

Keypad: Start, Stop, Speed Control, and Parameter Settings.

Monitor: LCD display shows operating status, frequency, and fault codes.

Connecting Devices

Follow these steps to connect devices:

Ensure the inverter is powered off before connecting.
Connect the motor to the output terminals.
Connect the control panel if applicable.
Power on the inverter and check connections.

Tip: Always double-check wiring before powering on.

Operating the Inverter

To operate the inverter:

Press the Start button to initiate operation.
Adjust speed using the speed control function.
Monitor the display for any fault codes.
Press Stop to halt operation safely.

WARNING! Do not exceed the rated parameters during operation.

Accessibility Features

The inverter includes features for ease of use, including a clear LCD display and intuitive controls for all users.

Care & Cleaning

Unplug the inverter before cleaning. Use a dry cloth to wipe the exterior; avoid using liquids or aerosols.

CAUTION! Do not allow moisture to enter the inverter.

Regulatory Information

This inverter complies with international safety standards and regulations. For support, visit the manufacturer's website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check input power connections and fuses.
No output to motor	Wiring issue	Verify motor connections and settings.
Overheating	Insufficient ventilation	Ensure proper airflow around the inverter.
Fault code displayed	Internal error	Refer to the manual for specific fault codes and solutions.

Reset: Follow the manual instructions for resetting the inverter if necessary.

Service: Contact customer support for further assistance.