INVT Inverter Goodrive GD35-022G-4-H1 Manual

The INVT Goodrive GD35-022G-4-H1 is a high-performance inverter designed for various applications, providing reliable control of AC motors. It features advanced control algorithms, a user-friendly interface, and robust protection mechanisms. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-performance control algorithms, user-friendly interface, multiple protection features, and compact design.

Feature	Description
Advanced Control Algorithms	Ensures precise motor control and efficiency.
User-Friendly Interface	Easy to navigate settings and configurations.
Multiple Protection Features	Over-voltage, under-voltage, and over-current protections.
Compact Design	Space-saving design suitable for various installations.
Wide Voltage Range	Compatible with a variety of power supply voltages.

Installation

Unpack and inspect the inverter. Ensure a stable and ventilated installation surface.

Mount the inverter securely on a wall or panel.
Connect the power supply according to the wiring diagram.
Ensure all connections are tight and secure.
Power on the inverter and check for proper operation.

WARNING! Ensure proper ventilation to avoid overheating. Follow electrical safety standards during installation.

First-Time Setup

Power on the inverter; follow the on-screen prompts for initial configuration.

Select the motor type and parameters in the setup menu.
Set the desired operating frequency and voltage.
Adjust acceleration and deceleration times as needed.
Save the settings and test the motor operation.

CAUTION! Ensure all connections are correct before powering on.

Specifications

Model: GD35-022G-4-H1.
Input Voltage: 220V AC.
Output Voltage: 0-220V AC.
Power Rating: 2.2 kW.
Control Method: V/F control, vector control.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.

Controls and Settings

Access settings via the front panel display. Key controls include POWER, UP/DOWN, and ENTER buttons.

Display: Shows operational status, error codes, and parameter settings.

Adjust parameters using the UP/DOWN buttons and confirm with ENTER.

Connecting Devices

Connect the inverter to the motor and power supply as per the wiring diagram.

Ensure the inverter is powered off before making connections.
Connect the motor leads to the inverter output terminals.
Connect the power supply to the inverter input terminals.
Double-check all connections before powering on.

Tip: Use appropriate gauge wiring for your installation to prevent overheating.

Operating the Inverter

Follow these steps to operate the inverter:

Power on the inverter using the front panel button.
Select the desired operating mode (e.g., manual, automatic).
Start the motor using the start command.
Monitor the display for operational status and any error messages.

WARNING! Do not operate the inverter without proper load connected.

Accessibility Features

The inverter includes features for easy access and operation, including clear display indicators and user-friendly controls.

Care & Cleaning

Unplug the inverter before cleaning. Use a dry cloth to wipe the exterior; do not use liquids or aerosols.

CAUTION! Avoid spraying liquids; keep away from moisture.

Regulatory Information

This inverter complies with international safety standards and regulations. For support, visit the official INVT website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check power connections and ensure supply is active.
Motor does not run	Incorrect wiring	Verify motor connections and settings.
Error code displayed	Fault condition	Refer to the manual for specific error code meanings.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.

Reset: Use the reset function in the menu if available.

Service: For further assistance, contact INVT support.