INVT Inverter Goodrive GD35-022G-4-S1 Manual

The INVT Goodrive GD35-022G-4-S1 is a high-performance inverter designed for various applications, providing reliable control of AC motors. It features advanced control algorithms, a user-friendly interface, and robust protection mechanisms. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-performance control algorithms, user-friendly interface, multiple protection features, and communication options.

Feature	Description
Advanced Control	Supports V/F control, vector control, and torque control.
User Interface	Easy-to-read LCD display for monitoring and configuration.
Protection Features	Over-voltage, under-voltage, over-current, and over-temperature protection.
Communication Options	Supports RS485, CANopen, and Modbus protocols.
Compact Design	Space-saving design suitable for various installations.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Mount the inverter securely on a stable surface.
Connect the input power supply according to the wiring diagram.
Connect the output to the motor ensuring correct phase alignment.
Ensure proper grounding of the inverter.

WARNING! Ensure all connections are secure to prevent electrical hazards.

First-Time Setup

Power on the inverter and follow the setup wizard on the display.

Select the motor type and parameters.
Set the operating frequency and voltage.
Configure communication settings if applicable.
Save the settings and perform a test run.

CAUTION! Ensure all settings are correct before operating the motor.

Specifications

Input Voltage: 220V AC.
Output Power: 2.2 kW.
Control Mode: V/F control, vector control.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.
Dimensions: 150mm x 100mm x 200mm.

Controls and Settings

Access settings via the LCD display. Key controls include:

Buttons: Power, Menu, Up, Down, Enter.

Settings include motor parameters, control mode, and communication settings.

Connecting Devices

Ensure proper connections to the motor and power supply.

Turn off power before making connections.
Follow the wiring diagram for correct phase connections.
Verify all connections are tight and secure.

Tip: Double-check wiring before powering on the inverter.

Operating the Inverter

To operate the inverter:

Power on the inverter using the main switch.
Select the desired operating mode from the menu.
Start the motor using the start command.
Monitor the operation via the LCD display.

WARNING! Do not exceed the rated parameters during operation.

Maintenance

Regular maintenance is essential for optimal performance:

Check connections periodically for wear and tear.
Clean the inverter casing to prevent dust accumulation.
Inspect cooling fans for proper operation.

CAUTION! Always disconnect power before performing maintenance.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed information, refer to the product certification documents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check input power connections and fuses.
Motor does not start	Incorrect settings	Verify motor parameters and restart.
Overheating	Insufficient ventilation	Ensure proper airflow around the inverter.
Faulty display	Connection issue	Check display connections and reset the inverter.

Reset: Use the reset function in the menu if available.

Service: Contact INVT support for further assistance.