INVT Inverter Goodrive GD35-022G-6-D1 Manual

The INVT Goodrive GD35-022G-6-D1 is a high-performance inverter designed for various applications, providing reliable power conversion and control. This manual covers essential information regarding safety, features, installation, setup, operation, and troubleshooting to ensure optimal use of the inverter.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key features include: high efficiency, compact design, multiple protection functions, and user-friendly interface.

Feature	Description
High Efficiency	Ensures minimal energy loss during conversion.
Compact Design	Space-saving design suitable for various installations.
Multiple Protection Functions	Over-voltage, under-voltage, over-current, and thermal protection.
User-Friendly Interface	Easy-to-navigate control panel for quick adjustments.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below:

Mount the inverter on a stable surface, ensuring adequate ventilation.
Connect the input power supply according to the wiring diagram.
Ensure all connections are secure and insulated.
Power on the inverter and check for proper operation.

WARNING! Ensure the inverter is installed by a qualified technician to avoid hazards.

First-Time Setup

Follow these steps for initial setup:

Power on the inverter and wait for the display to initialize.
Set the desired output voltage and frequency using the control panel.
Configure any additional settings as per your application requirements.
Test the output to ensure correct operation.

CAUTION! Double-check all settings before connecting to the load.

Specifications

Model: GD35-022G-6-D1
Input Voltage: 220V AC
Output Power: 2.2 kW
Efficiency: >95%
Operating Temperature: -10°C to 50°C
Protection Class: IP20

Controls and Settings

The inverter features a control panel with buttons for power, settings, and monitoring.

Display: Shows operational status, error codes, and settings.

Adjust settings using the navigation buttons and confirm with the enter key.

Connecting Devices

Follow these steps to connect devices:

Ensure the inverter is powered off before making connections.
Connect the load to the output terminals.
Verify all connections are secure and insulated.
Power on the inverter and check for proper operation.

Tip: Always use appropriate cables for your load requirements.

Operating the Inverter

To operate the inverter:

Press the power button to turn on the inverter.
Monitor the display for operational status and any error messages.
Adjust settings as necessary for your application.
Turn off the inverter when not in use.

WARNING! Always follow safety guidelines while operating the inverter.

Maintenance

Regular maintenance is essential for optimal performance:

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust buildup.
Check for any signs of wear or damage.
Consult a technician for any repairs or servicing.

Regulatory Information

This inverter complies with relevant safety and performance standards. For detailed regulatory information, refer to the documentation provided by the manufacturer.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check input power connections and fuses.
Error code displayed	Fault condition	Refer to the error code section in the manual.
Output voltage unstable	Load issues	Check load connections and specifications.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.

Reset: Follow the reset procedure in the manual if necessary.

Service: Contact INVT support for assistance.