INVT Inverter Goodrive GD35-022G-6-H1 Manual

The INVT Goodrive GD35-022G-6-H1 is a high-performance inverter designed for various applications, providing reliable power conversion and control. It features advanced control algorithms, multiple communication protocols, and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-efficiency inverter, user-friendly interface, multiple communication options, built-in protection features.

Feature	Description
High Efficiency	Maximizes energy conversion with minimal losses.
Multiple Communication Protocols	Supports Modbus, CANopen, and other protocols for integration.
User-Friendly Interface	Intuitive display for easy monitoring and control.
Built-in Protection	Over-voltage, under-voltage, and over-temperature protection.
Compact Design	Space-saving design suitable for various installations.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Mount the inverter on a stable surface, ensuring proper ventilation.
Connect the input power supply according to the wiring diagram.
Connect the output to the load, ensuring correct polarity.
Power on the inverter and check for proper operation.

WARNING! Ensure all connections are secure to prevent electrical hazards.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the appropriate operating mode based on your application.
Set the output voltage and frequency as required.
Configure communication settings if applicable.
Save settings and restart the inverter.

CAUTION! Ensure all settings are correct before operation.

Specifications

Input Voltage: 220V AC.
Output Voltage: 220V AC.
Power Rating: 2.2 kW.
Efficiency: Up to 95%.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.

Controls and Settings

Access settings via the user interface. Key controls include:

Display: Shows operational status and settings.

Buttons: Navigate through menus and adjust settings.

Indicators: LED indicators for power, fault, and operational status.

Connecting Devices

Ensure proper connections for optimal performance:

Turn off the inverter before making connections.
Connect input and output devices as per the wiring diagram.
Check all connections for tightness and correctness.

Tip: Always refer to the manual for specific wiring instructions.

Operating the Inverter

To operate the inverter:

Ensure all connections are secure.
Power on the inverter using the main switch.
Monitor the display for operational status.
Adjust settings as necessary for your application.

WARNING! Do not operate without proper load connected.

Accessibility Features

The inverter includes features to assist users with disabilities, including:

Clear display with high contrast for visibility and tactile buttons for ease of use.

Care & Cleaning

Unplug the inverter before cleaning. Use a dry cloth to wipe the exterior.

CAUTION! Do not use liquids or aerosols; keep away from moisture.

Regulatory Information

This inverter complies with international safety standards and regulations. For support, visit the official INVT website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	No input power	Check power supply connections.
Over-temperature warning	Insufficient ventilation	Ensure proper airflow around the inverter.
Output voltage unstable	Load fluctuations	Check load connections and stability.
Communication failure	Incorrect settings	Verify communication settings and connections.

Reset: Refer to the user manual for reset procedures.

Service: Contact INVT support for assistance.