INVT Inverter Goodrive GD35-030G-4-H2 Manual

The INVT Goodrive GD35-030G-4-H2 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, a user-friendly interface, and robust protection mechanisms. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Advanced control algorithms, user-friendly interface, multiple protection features, compact design, and high efficiency.

Feature	Description
Advanced Control	Supports vector control for precise motor control.
User Interface	Intuitive display for easy operation and monitoring.
Protection Features	Over-voltage, under-voltage, over-current, and thermal protection.
Compact Design	Space-saving design suitable for various installations.
High Efficiency	Optimized for energy savings and reduced operational costs.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below:

Mount the inverter securely on a stable surface.
Connect the power supply according to the wiring diagram.
Ensure proper grounding to prevent electrical hazards.
Connect the motor and other peripherals as needed.

WARNING! Ensure all connections are secure to avoid electrical shock or damage.

First-Time Setup

Power on the inverter and follow the setup instructions on the display.

Select the motor type and parameters in the setup menu.
Configure the control mode (V/F, vector control, etc.).
Set the desired operating frequency and acceleration/deceleration times.
Save the settings and test the operation.

CAUTION! Ensure all settings are correct before operating the motor.

Specifications

Model: GD35-030G-4-H2.
Input Voltage: 380V AC ± 15%.
Output Power: 30 kW.
Control Method: V/F control, vector control.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.

Controls and Settings

The inverter features a user-friendly interface with a digital display for monitoring and control.

Control Panel: Start/Stop, Speed Control, Parameter Settings, Fault Indicators.

Settings include motor parameters, control modes, and protection settings.

Connecting Devices

Follow these steps to connect devices to the inverter:

Ensure the inverter is powered off before making connections.
Connect the motor leads to the inverter output terminals.
Connect the control signals as per the wiring diagram.
Power on the inverter and check for proper operation.

Tip: Double-check all connections to prevent damage.

Operating the Inverter

To operate the inverter, follow these steps:

Press the Start button to initiate operation.
Adjust the speed using the control panel.
Monitor the display for any fault indications.
Press Stop to halt operation safely.

WARNING! Always follow safety protocols during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance:

Keep the inverter clean and free from dust.
Check connections periodically for signs of wear.
Ensure proper ventilation to prevent overheating.
Schedule professional servicing as needed.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the regulatory documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check power connections and fuses.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Motor not running	Incorrect settings	Verify motor parameters and control settings.
Fault indication	Internal error	Refer to the manual for error codes and solutions.

Reset: Follow the reset procedure in the manual if necessary.

Service: Contact INVT support for assistance.