INVT Inverter Goodrive GD35-030G-6-C1 Manual

The INVT Goodrive GD35-030G-6-C1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, high reliability, and a user-friendly interface. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key features include: high efficiency, compact design, multiple communication protocols, and customizable parameters for various applications.

Feature	Description
High Efficiency	Reduces energy consumption and operational costs.
Compact Design	Space-saving design suitable for various installations.
Multiple Communication Protocols	Supports Modbus, CANopen, and other protocols for easy integration.
Customizable Parameters	Allows users to adjust settings according to specific application needs.
Built-in Protection	Over-voltage, under-voltage, and over-temperature protection features.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below:

Mount the inverter in a well-ventilated area.
Connect the input power supply according to the wiring diagram.
Ensure all connections are secure and insulated.
Connect the output to the motor or load.

WARNING! Ensure the inverter is powered off during installation to avoid electric shock.

First-Time Setup

Power on the inverter and follow the setup wizard on the display.

Select the motor type and parameters.
Set the operational mode (e.g., V/F control, vector control).
Adjust the acceleration and deceleration times.
Save the settings and exit the setup menu.

CAUTION! Double-check all settings before starting the inverter.

Specifications

Input Voltage: 380V AC ± 15%.
Output Voltage: 0-380V AC.
Power Rating: 30 kW.
Control Method: V/F control, vector control.
Operating Temperature: -10°C to 50°C.
Protection Class: IP20.

Controls and Settings

The inverter features a user-friendly interface with a digital display for easy navigation.

Control Panel: Start/Stop, Up/Down buttons, and a digital display for parameter settings.

Settings include: motor parameters, operational modes, and protection settings.

Connecting Devices

Ensure all devices are compatible with the inverter specifications.

Turn off all devices before making connections.
Follow the wiring diagram for correct connections.
Verify connections before powering on the inverter.

Tip: Use shielded cables for signal connections to reduce interference.

Operating the Inverter

To operate the inverter, follow these steps:

Power on the inverter using the control panel.
Select the desired operational mode.
Start the motor by pressing the Start button.
Monitor the display for operational status and parameters.

WARNING! Do not operate the inverter beyond its rated specifications.

Maintenance

Regular maintenance is essential for optimal performance.

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Check for any abnormal sounds or vibrations during operation.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed regulatory information, refer to the product certification documents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check input power connections and fuses.
No output voltage	Faulty connections	Verify output connections and wiring.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Fault code displayed	Internal error	Refer to the fault code list in the manual.

Reset: Use the reset function in the menu if available.

Service: Contact INVT support for assistance.