INVT Inverter Goodrive GD35-037G-4-D1 Manual

The INVT Goodrive GD35-037G-4-D1 is a high-performance inverter designed for various industrial applications. It features advanced vector control technology, ensuring high efficiency and reliability. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key features include: high efficiency, compact design, user-friendly interface, and multiple protection functions.

Feature	Description
Vector Control	Ensures precise motor control and high performance.
Compact Design	Space-saving design suitable for various installations.
User Interface	Intuitive display for easy operation and monitoring.
Protection Functions	Over-voltage, under-voltage, and over-current protection.
Multiple Communication Protocols	Supports Modbus, CANopen, and other protocols.

Installation

Ensure proper installation for optimal performance. Follow safety guidelines and ensure all connections are secure.

Mount the inverter in a well-ventilated area.
Connect power supply according to the wiring diagram.
Ensure grounding is properly established.
Connect the motor to the inverter output.

WARNING! Ensure power is off during installation to avoid electric shock.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select motor parameters: Input motor specifications in the setup menu.
Set control mode: Choose between V/F control or vector control.
Adjust protection settings: Configure over-voltage and over-current limits.
Save settings and exit the setup menu.

CAUTION! Double-check all settings before saving to ensure proper operation.

Specifications

Input Voltage: 3-phase 380V-480V.
Output Power: 37kW.
Control Method: Vector control / V/F control.
Frequency Range: 0-400Hz.
Protection Level: IP20.
Operating Temperature: -10°C to 50°C.

Controls and Settings

Access the control panel for configuration and monitoring. Use the keypad for navigation and adjustments.

Key Controls: Power, Start/Stop, Up/Down, Enter, and Escape.

Settings include motor parameters, control mode, and protection settings.

Connecting Devices

Ensure all devices are compatible with the inverter specifications.

Turn off the inverter and devices before connecting.
Match cables to the appropriate terminals.
Verify all connections are secure before powering on.

Tip: Use shielded cables to reduce interference.

Operating the Inverter

Follow the operational guidelines for safe and efficient use.

Power on the inverter and ensure all indicators are normal.
Select the desired operation mode.
Start the motor and monitor performance through the display.
Adjust settings as necessary during operation.

WARNING! Do not exceed the rated capacity of the inverter.

Maintenance

Regular maintenance is essential for optimal performance and longevity.

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of wear or damage.
Ensure proper ventilation around the inverter.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed regulatory information, refer to the documentation provided.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check power connections and fuses.
Over-voltage alarm	Input voltage too high	Check input voltage and adjust settings.
Motor not running	Incorrect settings	Verify motor parameters and control mode.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.

Reset: Use the reset function in the menu if available.

Service: Contact INVT support for assistance.