INVT Inverter Goodrive GD35-037G-4-H1 Manual

The INVT Goodrive GD35-037G-4-H1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, high reliability, and a user-friendly interface. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Advanced control algorithms, user-friendly interface, multiple protection features, and compact design.

Feature	Description
Advanced Control	Supports vector control for precise motor control
Multiple Protection	Over-voltage, under-voltage, over-current protection
User Interface	Easy-to-read display with intuitive navigation
Compact Design	Space-saving design for easy installation
Wide Voltage Range	Operates effectively across a wide voltage range

Installation

Carefully unpack the inverter and inspect for any damage. Ensure a stable mounting surface.

Mount the inverter securely to a wall or panel.
Connect the power supply according to the wiring diagram.
Ensure all connections are tight and secure.
Power on the inverter and check for proper operation.

WARNING! Ensure proper ventilation and avoid exposure to moisture.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the motor type and parameters.
Set the operational limits and safety parameters.
Test the inverter with a connected motor.

CAUTION! Ensure all settings are correct before operating the motor.

Specifications

Input Voltage: 380V AC.
Output Voltage: 0-380V AC.
Power Rating: 37kW.
Frequency Range: 0-400Hz.
Control Mode: V/F control, vector control.
Protection Level: IP20.
Operating Temperature: -10°C to 50°C.

Controls and Settings

Access settings via the user interface. Key controls include power, start/stop, and parameter settings.

Display: Shows operational status, error codes, and parameter settings.

Adjust settings for motor control, acceleration, deceleration, and protection parameters.

Connecting Devices

Connect the inverter to the motor and power supply as per the wiring diagram.

Ensure all devices are powered off before making connections.
Follow the wiring diagram for correct connections.
Power on the inverter and check for proper operation.

Tip: Use appropriate cables and connectors to ensure safety and reliability.

Operating the Inverter

Follow the operational guidelines to ensure safe and efficient use of the inverter.

Start the inverter and monitor the display for any errors.
Adjust speed and torque settings as required.
Stop the inverter safely using the stop control.

WARNING! Do not exceed the operational limits to avoid damage.

Maintenance

Regular maintenance is essential for optimal performance.

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of wear or damage.

Regulatory Information

This inverter complies with international safety and performance standards. For detailed regulatory information, refer to the product documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check power connections and fuses.
Error code displayed	Fault in operation	Refer to the error code guide for troubleshooting.
Motor not running	Incorrect settings	Verify motor parameters and settings.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.

Reset: Follow the reset procedure in the user interface if necessary.

Service: For further assistance, contact INVT support.