INVT Inverter Goodrive GD35-037G-4-S1 Manual

The INVT Goodrive GD35-037G-4-S1 is a high-performance inverter designed for various industrial applications. It features advanced control algorithms, high reliability, and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-performance control algorithms, user-friendly interface, multiple protection features, and compact design.

Feature	Description
Advanced Control	Supports vector control and V/F control modes.
Protection Features	Over-voltage, under-voltage, over-current, and over-temperature protection.
Communication	Supports RS485 and CAN communication protocols.
Compact Design	Space-saving design for easy installation.
Easy Maintenance	Modular design for quick replacement of components.

Installation

Ensure proper installation for optimal performance. Follow the guidelines below.

Mount the inverter on a stable surface, ensuring adequate ventilation.
Connect the input power supply according to the wiring diagram.
Connect the output to the motor or load.
Ensure all connections are secure before powering on.

WARNING! Ensure proper grounding to avoid electrical hazards.

First-Time Setup

Power on the inverter and follow the on-screen prompts for initial configuration.

Select the motor type and parameters in the setup menu.
Configure the communication settings if applicable.
Set the operational parameters such as speed and torque.
Save the settings and exit the setup menu.

CAUTION! Double-check all settings before operation.

Specifications

Input Voltage: 380V AC.
Output Power: 37kW.
Control Method: Vector control and V/F control.
Protection Class: IP20.
Operating Temperature: -10°C to 50°C.
Weight: 15 kg.

Controls and Settings

Access the control panel for settings adjustments and monitoring.

Control Panel: Start/Stop, Speed Control, Fault Indicator, and Parameter Settings.

Adjust parameters such as acceleration, deceleration, and frequency settings through the menu.

Connecting Devices

Ensure proper connections for optimal performance.

Turn off the inverter and devices before connecting.
Match cables to ports according to the wiring diagram.
Power on the inverter and devices after connections are secure.

Tip: Always refer to the wiring diagram for correct connections.

Operating the Inverter

Follow these steps to operate the inverter safely and effectively.

Press the Start button to power on the inverter.
Adjust the speed using the speed control knob.
Monitor the operational status through the display panel.
Stop the inverter using the Stop button when necessary.

WARNING! Do not operate the inverter without proper load connected.

Maintenance

Regular maintenance is essential for optimal performance.

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust accumulation.
Check for any signs of wear or damage.
Ensure proper ventilation around the inverter.

Regulatory Information

This inverter complies with international safety and performance standards. For more information, refer to the product documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check power connections and supply voltage.
Error code displayed	Fault condition	Refer to the manual for error code definitions.
Overheating	Insufficient ventilation	Ensure proper airflow around the inverter.
Motor not running	Incorrect settings	Check motor parameters and settings.

Reset: Use the reset function in the menu if necessary.

Service: Contact INVT support for assistance.